Carrier L30545324 Heat Kit
The Carrier L30545324 Heat Kit is a high-performance 8kW electric heater kit designed for seamless integration into Carrier fan coils and air handlers. Engineered with an advanced alloy open coil heating element, this non-fused 208/230-1 phase field-installable module provides reliable supplemental heat or emergency backup for residential and light commercial HVAC systems. This OEM Carrier replacement part ensures complete electrical termination compatibility and dimensional precision, allowing for a straightforward slide-in installation without structural modifications.
As a veteran-grade HVAC electric heat kit, the L30545324 includes factory-installed thermal limit controls and safety switches to maintain optimal discharge temperatures. The unit is ETL listed and specifically tested for use with designated Carrier and Bryant air handlers, converting standard cooling or heat pump units into multi-stage heating systems. For contractors, this kit is the professional choice for maintaining factory-spec performance and airflow integrity in 208/230V single-phase applications.
Key Benefit List:
- Precision Compatibility: Designed specifically as an 8kV Carrier heater kit for Carrier L30545324 applications, ensuring a perfect physical and electrical fit.
- Enhanced Thermal Efficiency: Features a high-grade open coil heater element for rapid heat transfer and consistent airflow performance.
- Integrated Safety Logic: Equipped with primary and secondary thermal limit protection to prevent overheating during restricted airflow conditions.
- Simplified Field Installation: The modular "plug-and-play" design reduces labor time, utilizing the air handler's built-in mounting brackets and wiring harnesses.
- Multi-Stage Capability: Allows for total system integration with existing controls to provide efficient auxiliary heat during defrost cycles or extreme ambient drops.
Common Questions:
What is the circuit breaker requirement for this 8kW kit?
The Carrier L30545324 is a non-fused model. You must refer to the specific air handler’s data plate and local electrical codes to determine the appropriate HACR circuit breaker and wire gauge, typically requiring a dedicated 45-50 amp circuit depending on the total unit MCA.
Is this kit compatible with 3-phase power?
No, this specific heater kit is engineered for 208/230V single-phase (1-PH) power supplies. For 3-phase applications, an alternative kit must be sourced to match the electrical characteristics of the site.
Can I use this kit for emergency heat?
Yes, when correctly wired to a compatible thermostat, this 8kW electric furnace kit serves as the primary heat source in "Emergency Heat" mode or as supplemental heat when the heat pump alone cannot meet the setpoint.
Item is Non Cancelable / Non Returnable
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $246.12
-65%$246.12
$86.14Carrier L30545324 Heat Kit
The Carrier L30545324 Heat Kit is a high-performance 8kW electric heater kit designed for seamless integration into Carrier fan coils and air handlers. Engineered with an advanced alloy open coil heating element, this non-fused 208/230-1 phase field-installable module provides reliable supplemental heat or emergency backup for residential and light commercial HVAC systems. This OEM Carrier replacement part ensures complete electrical termination compatibility and dimensional precision, allowing for a straightforward slide-in installation without structural modifications.
As a veteran-grade HVAC electric heat kit, the L30545324 includes factory-installed thermal limit controls and safety switches to maintain optimal discharge temperatures. The unit is ETL listed and specifically tested for use with designated Carrier and Bryant air handlers, converting standard cooling or heat pump units into multi-stage heating systems. For contractors, this kit is the professional choice for maintaining factory-spec performance and airflow integrity in 208/230V single-phase applications.
Key Benefit List:
- Precision Compatibility: Designed specifically as an 8kV Carrier heater kit for Carrier L30545324 applications, ensuring a perfect physical and electrical fit.
- Enhanced Thermal Efficiency: Features a high-grade open coil heater element for rapid heat transfer and consistent airflow performance.
- Integrated Safety Logic: Equipped with primary and secondary thermal limit protection to prevent overheating during restricted airflow conditions.
- Simplified Field Installation: The modular "plug-and-play" design reduces labor time, utilizing the air handler's built-in mounting brackets and wiring harnesses.
- Multi-Stage Capability: Allows for total system integration with existing controls to provide efficient auxiliary heat during defrost cycles or extreme ambient drops.
Common Questions:
What is the circuit breaker requirement for this 8kW kit?
The Carrier L30545324 is a non-fused model. You must refer to the specific air handler’s data plate and local electrical codes to determine the appropriate HACR circuit breaker and wire gauge, typically requiring a dedicated 45-50 amp circuit depending on the total unit MCA.
Is this kit compatible with 3-phase power?
No, this specific heater kit is engineered for 208/230V single-phase (1-PH) power supplies. For 3-phase applications, an alternative kit must be sourced to match the electrical characteristics of the site.
Can I use this kit for emergency heat?
Yes, when correctly wired to a compatible thermostat, this 8kW electric furnace kit serves as the primary heat source in "Emergency Heat" mode or as supplemental heat when the heat pump alone cannot meet the setpoint.
Item is Non Cancelable / Non Returnable
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Carrier L30545324 Heat Kit is a high-performance 8kW electric heater kit designed for seamless integration into Carrier fan coils and air handlers. Engineered with an advanced alloy open coil heating element, this non-fused 208/230-1 phase field-installable module provides reliable supplemental heat or emergency backup for residential and light commercial HVAC systems. This OEM Carrier replacement part ensures complete electrical termination compatibility and dimensional precision, allowing for a straightforward slide-in installation without structural modifications.
As a veteran-grade HVAC electric heat kit, the L30545324 includes factory-installed thermal limit controls and safety switches to maintain optimal discharge temperatures. The unit is ETL listed and specifically tested for use with designated Carrier and Bryant air handlers, converting standard cooling or heat pump units into multi-stage heating systems. For contractors, this kit is the professional choice for maintaining factory-spec performance and airflow integrity in 208/230V single-phase applications.
Key Benefit List:
- Precision Compatibility: Designed specifically as an 8kV Carrier heater kit for Carrier L30545324 applications, ensuring a perfect physical and electrical fit.
- Enhanced Thermal Efficiency: Features a high-grade open coil heater element for rapid heat transfer and consistent airflow performance.
- Integrated Safety Logic: Equipped with primary and secondary thermal limit protection to prevent overheating during restricted airflow conditions.
- Simplified Field Installation: The modular "plug-and-play" design reduces labor time, utilizing the air handler's built-in mounting brackets and wiring harnesses.
- Multi-Stage Capability: Allows for total system integration with existing controls to provide efficient auxiliary heat during defrost cycles or extreme ambient drops.
Common Questions:
What is the circuit breaker requirement for this 8kW kit?
The Carrier L30545324 is a non-fused model. You must refer to the specific air handler’s data plate and local electrical codes to determine the appropriate HACR circuit breaker and wire gauge, typically requiring a dedicated 45-50 amp circuit depending on the total unit MCA.
Is this kit compatible with 3-phase power?
No, this specific heater kit is engineered for 208/230V single-phase (1-PH) power supplies. For 3-phase applications, an alternative kit must be sourced to match the electrical characteristics of the site.
Can I use this kit for emergency heat?
Yes, when correctly wired to a compatible thermostat, this 8kW electric furnace kit serves as the primary heat source in "Emergency Heat" mode or as supplemental heat when the heat pump alone cannot meet the setpoint.
Item is Non Cancelable / Non Returnable
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
