Carrier KSALA0301410 Kit
The Carrier KSALA0301410 Low Ambient Kit is a field-installed fan cycling control designed to maintain stable head pressure in cooling systems and heat pumps operating at low outdoor temperatures. This OEM pressure switch kit provides the necessary logic to cycle the outdoor fan motor on and off, preventing the evaporator coil from freezing and ensuring proper refrigerant metering when ambient conditions drop below 55°F. Engineered for use with R-410A and R-22 systems, this kit is compatible with single-speed and specifically approved 2-stage units utilizing PSC fan motors.
As a low ambient pressure switch, the KSALA0301410 monitors liquid line pressure to ensure the condenser does not over-cool the subcooled liquid. For technicians performing HVAC low ambient cooling modifications, this kit is often a required accessory for server rooms or equipment cooling applications. Note that successful installation typically requires crankcase heaters, hard start kits, and evaporator freeze thermostats to ensure total system reliability in cold climates. This Carrier replacement part includes the pressure switch (HK02ZA365), capillary tube, and necessary connectors for a direct series wiring into the black fan lead.
Key Benefits- Precise Head Pressure Regulation: Prevents system tripping by cycling the condenser fan to maintain optimal R-410A head pressure.
- Broad Compatibility: Fits various Carrier, Bryant, and Payne residential and light commercial condensing units.
- OEM Reliability: Genuine Carrier low ambient kit ensures exact cut-in and cut-out pressure settings without the drift common in aftermarket controls.
- Cold Weather Protection: Enables mechanical cooling operation down to 0°F when paired with appropriate wind baffles.
Does this kit work with ECM fan motors?
No, this pressure switch kit is designed for use with PSC (Permanent Split Capacitor) fan motors. Modulating or ECM motors typically require a different control method, such as a MotorMaster controller.
Are additional parts required for a full low ambient setup?
Yes, for low ambient cooling, most manufacturers require the simultaneous installation of a crankcase heater and a start capacitor/relay to protect the compressor during cold starts.
Can this be used on a heat pump?
Yes, the KSALA0301410 is compatible with heat pumps, but it must be wired through an isolation relay to ensure the fan functions correctly during the heating and defrost cycles.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $504.01
-65%$504.01
$176.40Carrier KSALA0301410 Kit
The Carrier KSALA0301410 Low Ambient Kit is a field-installed fan cycling control designed to maintain stable head pressure in cooling systems and heat pumps operating at low outdoor temperatures. This OEM pressure switch kit provides the necessary logic to cycle the outdoor fan motor on and off, preventing the evaporator coil from freezing and ensuring proper refrigerant metering when ambient conditions drop below 55°F. Engineered for use with R-410A and R-22 systems, this kit is compatible with single-speed and specifically approved 2-stage units utilizing PSC fan motors.
As a low ambient pressure switch, the KSALA0301410 monitors liquid line pressure to ensure the condenser does not over-cool the subcooled liquid. For technicians performing HVAC low ambient cooling modifications, this kit is often a required accessory for server rooms or equipment cooling applications. Note that successful installation typically requires crankcase heaters, hard start kits, and evaporator freeze thermostats to ensure total system reliability in cold climates. This Carrier replacement part includes the pressure switch (HK02ZA365), capillary tube, and necessary connectors for a direct series wiring into the black fan lead.
Key Benefits- Precise Head Pressure Regulation: Prevents system tripping by cycling the condenser fan to maintain optimal R-410A head pressure.
- Broad Compatibility: Fits various Carrier, Bryant, and Payne residential and light commercial condensing units.
- OEM Reliability: Genuine Carrier low ambient kit ensures exact cut-in and cut-out pressure settings without the drift common in aftermarket controls.
- Cold Weather Protection: Enables mechanical cooling operation down to 0°F when paired with appropriate wind baffles.
Does this kit work with ECM fan motors?
No, this pressure switch kit is designed for use with PSC (Permanent Split Capacitor) fan motors. Modulating or ECM motors typically require a different control method, such as a MotorMaster controller.
Are additional parts required for a full low ambient setup?
Yes, for low ambient cooling, most manufacturers require the simultaneous installation of a crankcase heater and a start capacitor/relay to protect the compressor during cold starts.
Can this be used on a heat pump?
Yes, the KSALA0301410 is compatible with heat pumps, but it must be wired through an isolation relay to ensure the fan functions correctly during the heating and defrost cycles.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Carrier KSALA0301410 Low Ambient Kit is a field-installed fan cycling control designed to maintain stable head pressure in cooling systems and heat pumps operating at low outdoor temperatures. This OEM pressure switch kit provides the necessary logic to cycle the outdoor fan motor on and off, preventing the evaporator coil from freezing and ensuring proper refrigerant metering when ambient conditions drop below 55°F. Engineered for use with R-410A and R-22 systems, this kit is compatible with single-speed and specifically approved 2-stage units utilizing PSC fan motors.
As a low ambient pressure switch, the KSALA0301410 monitors liquid line pressure to ensure the condenser does not over-cool the subcooled liquid. For technicians performing HVAC low ambient cooling modifications, this kit is often a required accessory for server rooms or equipment cooling applications. Note that successful installation typically requires crankcase heaters, hard start kits, and evaporator freeze thermostats to ensure total system reliability in cold climates. This Carrier replacement part includes the pressure switch (HK02ZA365), capillary tube, and necessary connectors for a direct series wiring into the black fan lead.
Key Benefits- Precise Head Pressure Regulation: Prevents system tripping by cycling the condenser fan to maintain optimal R-410A head pressure.
- Broad Compatibility: Fits various Carrier, Bryant, and Payne residential and light commercial condensing units.
- OEM Reliability: Genuine Carrier low ambient kit ensures exact cut-in and cut-out pressure settings without the drift common in aftermarket controls.
- Cold Weather Protection: Enables mechanical cooling operation down to 0°F when paired with appropriate wind baffles.
Does this kit work with ECM fan motors?
No, this pressure switch kit is designed for use with PSC (Permanent Split Capacitor) fan motors. Modulating or ECM motors typically require a different control method, such as a MotorMaster controller.
Are additional parts required for a full low ambient setup?
Yes, for low ambient cooling, most manufacturers require the simultaneous installation of a crankcase heater and a start capacitor/relay to protect the compressor during cold starts.
Can this be used on a heat pump?
Yes, the KSALA0301410 is compatible with heat pumps, but it must be wired through an isolation relay to ensure the fan functions correctly during the heating and defrost cycles.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
