Carrier KH42ME060 Filter Drier
The Carrier KH42ME060 suct filter drier is a specialized 3/8" flare suction line filter drier designed for compressor protection in residential and commercial HVACR systems. Engineered to handle high-moisture and acid-contaminated environments, this suction line drier is an essential component during burnout cleanup procedures. It features a high-capacity desiccant core that effectively captures physical contaminants, moisture, and acid to prevent premature compressor failure and maintain system chemistry.
As a technically superior HVAC part, the KH42ME060 utilizes a 3/8 SAE flare connection for reliable, mechanical sealing without the need for brazing in sensitive areas. This model is compatible with a broad range of refrigerants, including R-410A, R-22, R-134a, and R-404A. For veteran technicians, this drier provides a low-pressure drop solution while ensuring sub-20 micron filtration. Its unidirectional flow design is optimized for placement near the compressor to trap debris before it enters the suction valves, making it a critical Carrier OEM replacement part for ensuring long-term unit reliability after a system contamination event.
Key Benefits:- High-Capacity Acid Removal: Specialized core effectively neutralizes acids formed during motor burnouts to protect new compressor oil.
- 3/8" Flare Connection: Allows for secure, leak-proof mechanical installation and easier replacement during routine maintenance.
- Superior Solid Filtration: Traps scale, weld slag, and other debris down to 20 microns to prevent mechanical wear on internal compressor components.
- Multi-Refrigerant Compatibility: Rated for use with POE and mineral oils across common refrigerants like R-410A and R-22.
- Corrosion-Resistant Housing: Durable exterior finish designed to withstand the moisture and condensation common in suction line applications.
- When should I install a suction line filter drier versus a liquid line drier? Suction line driers like the Carrier KH42ME060 are typically installed after a compressor burnout or when acid levels are high to protect the new compressor. Liquid line driers are standard for moisture removal during normal operation.
- What is the maximum allowable pressure drop for this suction drier? For most HVACR systems, you should monitor the pressure drop across the suction filter; if it exceeds 2-3 psi (depending on the application), the drier is restricted and must be replaced to prevent compressor overheating.
- Is the KH42ME060 bi-directional? No, this suction drier is a unidirectional flow component. Always verify the flow arrow on the shell points toward the compressor during installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $134.74
-65%$134.74
$47.16Carrier KH42ME060 Filter Drier
The Carrier KH42ME060 suct filter drier is a specialized 3/8" flare suction line filter drier designed for compressor protection in residential and commercial HVACR systems. Engineered to handle high-moisture and acid-contaminated environments, this suction line drier is an essential component during burnout cleanup procedures. It features a high-capacity desiccant core that effectively captures physical contaminants, moisture, and acid to prevent premature compressor failure and maintain system chemistry.
As a technically superior HVAC part, the KH42ME060 utilizes a 3/8 SAE flare connection for reliable, mechanical sealing without the need for brazing in sensitive areas. This model is compatible with a broad range of refrigerants, including R-410A, R-22, R-134a, and R-404A. For veteran technicians, this drier provides a low-pressure drop solution while ensuring sub-20 micron filtration. Its unidirectional flow design is optimized for placement near the compressor to trap debris before it enters the suction valves, making it a critical Carrier OEM replacement part for ensuring long-term unit reliability after a system contamination event.
Key Benefits:- High-Capacity Acid Removal: Specialized core effectively neutralizes acids formed during motor burnouts to protect new compressor oil.
- 3/8" Flare Connection: Allows for secure, leak-proof mechanical installation and easier replacement during routine maintenance.
- Superior Solid Filtration: Traps scale, weld slag, and other debris down to 20 microns to prevent mechanical wear on internal compressor components.
- Multi-Refrigerant Compatibility: Rated for use with POE and mineral oils across common refrigerants like R-410A and R-22.
- Corrosion-Resistant Housing: Durable exterior finish designed to withstand the moisture and condensation common in suction line applications.
- When should I install a suction line filter drier versus a liquid line drier? Suction line driers like the Carrier KH42ME060 are typically installed after a compressor burnout or when acid levels are high to protect the new compressor. Liquid line driers are standard for moisture removal during normal operation.
- What is the maximum allowable pressure drop for this suction drier? For most HVACR systems, you should monitor the pressure drop across the suction filter; if it exceeds 2-3 psi (depending on the application), the drier is restricted and must be replaced to prevent compressor overheating.
- Is the KH42ME060 bi-directional? No, this suction drier is a unidirectional flow component. Always verify the flow arrow on the shell points toward the compressor during installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Carrier KH42ME060 suct filter drier is a specialized 3/8" flare suction line filter drier designed for compressor protection in residential and commercial HVACR systems. Engineered to handle high-moisture and acid-contaminated environments, this suction line drier is an essential component during burnout cleanup procedures. It features a high-capacity desiccant core that effectively captures physical contaminants, moisture, and acid to prevent premature compressor failure and maintain system chemistry.
As a technically superior HVAC part, the KH42ME060 utilizes a 3/8 SAE flare connection for reliable, mechanical sealing without the need for brazing in sensitive areas. This model is compatible with a broad range of refrigerants, including R-410A, R-22, R-134a, and R-404A. For veteran technicians, this drier provides a low-pressure drop solution while ensuring sub-20 micron filtration. Its unidirectional flow design is optimized for placement near the compressor to trap debris before it enters the suction valves, making it a critical Carrier OEM replacement part for ensuring long-term unit reliability after a system contamination event.
Key Benefits:- High-Capacity Acid Removal: Specialized core effectively neutralizes acids formed during motor burnouts to protect new compressor oil.
- 3/8" Flare Connection: Allows for secure, leak-proof mechanical installation and easier replacement during routine maintenance.
- Superior Solid Filtration: Traps scale, weld slag, and other debris down to 20 microns to prevent mechanical wear on internal compressor components.
- Multi-Refrigerant Compatibility: Rated for use with POE and mineral oils across common refrigerants like R-410A and R-22.
- Corrosion-Resistant Housing: Durable exterior finish designed to withstand the moisture and condensation common in suction line applications.
- When should I install a suction line filter drier versus a liquid line drier? Suction line driers like the Carrier KH42ME060 are typically installed after a compressor burnout or when acid levels are high to protect the new compressor. Liquid line driers are standard for moisture removal during normal operation.
- What is the maximum allowable pressure drop for this suction drier? For most HVACR systems, you should monitor the pressure drop across the suction filter; if it exceeds 2-3 psi (depending on the application), the drier is restricted and must be replaced to prevent compressor overheating.
- Is the KH42ME060 bi-directional? No, this suction drier is a unidirectional flow component. Always verify the flow arrow on the shell points toward the compressor during installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
