Carrier KAACH1401AAA Crankcase Heater
The Carrier KAACH1401AAA Crankcase Heater is a critical OEM replacement part designed to maintain optimal oil temperature in residential and commercial compressors. Operating at 240V with a 40W power output, this bellyband heater ensures that lubricant remains at a higher temperature than the system's coldest point, effectively preventing refrigerant migration during off-cycles. By keeping the refrigerant from condensing in the crankcase, it eliminates the risk of oil dilution and liquid slugging, which are primary causes of catastrophic compressor failure during startup.
This crankcase heater kit is engineered for a precision fit on various Carrier, Bryant, and Payne condensing units and heat pumps. It typically wires across the open contacts of the compressor contactor, ensuring it remains energized whenever the system is idle. Technicians often require this heater for low-ambient operations and systems utilizing MotorMaster controllers to guarantee smooth compressor startup and long-term HVAC system reliability. Incorporating this genuine HVAC replacement part restores factory-spec protection against flooded starts in cold weather conditions.
Key Benefits- Prevents Liquid Slugging: Maintains oil temperature to stop refrigerant from condensing into a liquid state within the crankcase.
- Optimizes Lubrication: Ensures proper oil viscosity for immediate protection of internal bearings and scrolls upon system startup.
- Durable OEM Construction: Built to Carrier factory specifications for exact fitment and thermal transfer efficiency.
- Universal Compatibility: Fits a broad range of 240V residential and light commercial HVAC equipment.
How do I verify if my crankcase heater is functioning?
Using a clamp meter, check for amperage draw while the contactor is de-energized. A reading matching the 40W spec at 240V confirms the element is intact. Physically, the base of the compressor should feel warm to the touch during the off-cycle.
Can this heater be used on 208V systems?
Yes, this 240V heater can be installed on 208V circuits; however, the heat output will be slightly lower. Ensure the reduced wattage meets the specific requirements of the application, especially in extreme low-ambient environments.
Where should the bellyband be positioned?
The heater should be fastened firmly around the lower section of the compressor assembly, typically 2 inches above the mounting plate, to ensure heat is directly transferred to the oil reservoir.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $136.68
-65%$136.68
$47.84Carrier KAACH1401AAA Crankcase Heater
The Carrier KAACH1401AAA Crankcase Heater is a critical OEM replacement part designed to maintain optimal oil temperature in residential and commercial compressors. Operating at 240V with a 40W power output, this bellyband heater ensures that lubricant remains at a higher temperature than the system's coldest point, effectively preventing refrigerant migration during off-cycles. By keeping the refrigerant from condensing in the crankcase, it eliminates the risk of oil dilution and liquid slugging, which are primary causes of catastrophic compressor failure during startup.
This crankcase heater kit is engineered for a precision fit on various Carrier, Bryant, and Payne condensing units and heat pumps. It typically wires across the open contacts of the compressor contactor, ensuring it remains energized whenever the system is idle. Technicians often require this heater for low-ambient operations and systems utilizing MotorMaster controllers to guarantee smooth compressor startup and long-term HVAC system reliability. Incorporating this genuine HVAC replacement part restores factory-spec protection against flooded starts in cold weather conditions.
Key Benefits- Prevents Liquid Slugging: Maintains oil temperature to stop refrigerant from condensing into a liquid state within the crankcase.
- Optimizes Lubrication: Ensures proper oil viscosity for immediate protection of internal bearings and scrolls upon system startup.
- Durable OEM Construction: Built to Carrier factory specifications for exact fitment and thermal transfer efficiency.
- Universal Compatibility: Fits a broad range of 240V residential and light commercial HVAC equipment.
How do I verify if my crankcase heater is functioning?
Using a clamp meter, check for amperage draw while the contactor is de-energized. A reading matching the 40W spec at 240V confirms the element is intact. Physically, the base of the compressor should feel warm to the touch during the off-cycle.
Can this heater be used on 208V systems?
Yes, this 240V heater can be installed on 208V circuits; however, the heat output will be slightly lower. Ensure the reduced wattage meets the specific requirements of the application, especially in extreme low-ambient environments.
Where should the bellyband be positioned?
The heater should be fastened firmly around the lower section of the compressor assembly, typically 2 inches above the mounting plate, to ensure heat is directly transferred to the oil reservoir.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Carrier KAACH1401AAA Crankcase Heater is a critical OEM replacement part designed to maintain optimal oil temperature in residential and commercial compressors. Operating at 240V with a 40W power output, this bellyband heater ensures that lubricant remains at a higher temperature than the system's coldest point, effectively preventing refrigerant migration during off-cycles. By keeping the refrigerant from condensing in the crankcase, it eliminates the risk of oil dilution and liquid slugging, which are primary causes of catastrophic compressor failure during startup.
This crankcase heater kit is engineered for a precision fit on various Carrier, Bryant, and Payne condensing units and heat pumps. It typically wires across the open contacts of the compressor contactor, ensuring it remains energized whenever the system is idle. Technicians often require this heater for low-ambient operations and systems utilizing MotorMaster controllers to guarantee smooth compressor startup and long-term HVAC system reliability. Incorporating this genuine HVAC replacement part restores factory-spec protection against flooded starts in cold weather conditions.
Key Benefits- Prevents Liquid Slugging: Maintains oil temperature to stop refrigerant from condensing into a liquid state within the crankcase.
- Optimizes Lubrication: Ensures proper oil viscosity for immediate protection of internal bearings and scrolls upon system startup.
- Durable OEM Construction: Built to Carrier factory specifications for exact fitment and thermal transfer efficiency.
- Universal Compatibility: Fits a broad range of 240V residential and light commercial HVAC equipment.
How do I verify if my crankcase heater is functioning?
Using a clamp meter, check for amperage draw while the contactor is de-energized. A reading matching the 40W spec at 240V confirms the element is intact. Physically, the base of the compressor should feel warm to the touch during the off-cycle.
Can this heater be used on 208V systems?
Yes, this 240V heater can be installed on 208V circuits; however, the heat output will be slightly lower. Ensure the reduced wattage meets the specific requirements of the application, especially in extreme low-ambient environments.
Where should the bellyband be positioned?
The heater should be fastened firmly around the lower section of the compressor assembly, typically 2 inches above the mounting plate, to ensure heat is directly transferred to the oil reservoir.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
