Carrier KA56SL100 Grommet
The Copeland CR47K6-PFV-875 is a high-performance 4-ton hermetic reciprocating compressor engineered for demanding residential and light commercial air conditioning and heat pump applications. operating on a 208-230V single-phase power supply at 60Hz, this robust unit delivers a nominal cooling capacity of approximately 47,000 BTU/hr. Designed as a reliable R-22 replacement compressor, it is also compatible with R-407C when paired with the appropriate polyol ester (POE) lubricant, making it a versatile choice for retrofitting aging systems. The "875" bill of materials (BOM) ensures a comprehensive field-service kit, typically including a 42-inch molded plug wiring harness, a crankcase heater, and essential mounting hardware.
Built with rugged reciprocating technology, the CR47K6-PFV-875 excels in high-ambient conditions up to 55°C and features superior liquid handling capabilities. Its internal inherent protection (line break) safeguards the motor against thermal and electrical overloads, while the 7.5" x 7.5" bolt mounting pattern ensures standard compatibility with most condenser bases. For technicians performing a compressor change-out, this unit offers the industry-leading reliability expected from the Copeland CR series, providing a cost-effective solution for restoring system efficiency without a full equipment replacement.
Key Benefits- Dual-Refrigerant Compatibility: Optimized for R-22 and R-407C applications with POE oil compatibility.
- High-Ambient Performance: Engineered to maintain stable head pressures and cooling efficiency during extreme temperature peaks.
- Complete Service Kit: The 875 BOM includes a molded plug harness and crankcase heater for faster on-site installation.
- Standard Footprint: Utilizes the universal 7.5-inch square mounting base for seamless mechanical integration.
- Enhanced Motor Protection: Features internal line-break protection to mitigate failure from electrical fluctuations or slugging.
Is the CR47K6-PFV-875 compatible with R-410A systems?
No, this is a reciprocating compressor designed for R-22 or R-407C high-pressure applications. It cannot be used in R-410A systems due to significant differences in operating pressures and lubricant requirements.
Does this unit require a start capacitor?
Yes, as a permanent split capacitor (PSC) motor, it requires a run capacitor (typically 50-60 MFD/440V). In high-torque starting situations, a hard start kit (start capacitor and relay) is recommended to prevent stalled rotors.
Can I use mineral oil with this compressor for R-22?
The CR47K6-PFV-875 typically comes pre-charged with POE oil. While POE is compatible with R-22, you should never mix large quantities of mineral oil into a POE system, as it can interfere with oil return and heat transfer.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $2.29
-65%$2.29
$0.80Carrier KA56SL100 Grommet
The Copeland CR47K6-PFV-875 is a high-performance 4-ton hermetic reciprocating compressor engineered for demanding residential and light commercial air conditioning and heat pump applications. operating on a 208-230V single-phase power supply at 60Hz, this robust unit delivers a nominal cooling capacity of approximately 47,000 BTU/hr. Designed as a reliable R-22 replacement compressor, it is also compatible with R-407C when paired with the appropriate polyol ester (POE) lubricant, making it a versatile choice for retrofitting aging systems. The "875" bill of materials (BOM) ensures a comprehensive field-service kit, typically including a 42-inch molded plug wiring harness, a crankcase heater, and essential mounting hardware.
Built with rugged reciprocating technology, the CR47K6-PFV-875 excels in high-ambient conditions up to 55°C and features superior liquid handling capabilities. Its internal inherent protection (line break) safeguards the motor against thermal and electrical overloads, while the 7.5" x 7.5" bolt mounting pattern ensures standard compatibility with most condenser bases. For technicians performing a compressor change-out, this unit offers the industry-leading reliability expected from the Copeland CR series, providing a cost-effective solution for restoring system efficiency without a full equipment replacement.
Key Benefits- Dual-Refrigerant Compatibility: Optimized for R-22 and R-407C applications with POE oil compatibility.
- High-Ambient Performance: Engineered to maintain stable head pressures and cooling efficiency during extreme temperature peaks.
- Complete Service Kit: The 875 BOM includes a molded plug harness and crankcase heater for faster on-site installation.
- Standard Footprint: Utilizes the universal 7.5-inch square mounting base for seamless mechanical integration.
- Enhanced Motor Protection: Features internal line-break protection to mitigate failure from electrical fluctuations or slugging.
Is the CR47K6-PFV-875 compatible with R-410A systems?
No, this is a reciprocating compressor designed for R-22 or R-407C high-pressure applications. It cannot be used in R-410A systems due to significant differences in operating pressures and lubricant requirements.
Does this unit require a start capacitor?
Yes, as a permanent split capacitor (PSC) motor, it requires a run capacitor (typically 50-60 MFD/440V). In high-torque starting situations, a hard start kit (start capacitor and relay) is recommended to prevent stalled rotors.
Can I use mineral oil with this compressor for R-22?
The CR47K6-PFV-875 typically comes pre-charged with POE oil. While POE is compatible with R-22, you should never mix large quantities of mineral oil into a POE system, as it can interfere with oil return and heat transfer.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Copeland CR47K6-PFV-875 is a high-performance 4-ton hermetic reciprocating compressor engineered for demanding residential and light commercial air conditioning and heat pump applications. operating on a 208-230V single-phase power supply at 60Hz, this robust unit delivers a nominal cooling capacity of approximately 47,000 BTU/hr. Designed as a reliable R-22 replacement compressor, it is also compatible with R-407C when paired with the appropriate polyol ester (POE) lubricant, making it a versatile choice for retrofitting aging systems. The "875" bill of materials (BOM) ensures a comprehensive field-service kit, typically including a 42-inch molded plug wiring harness, a crankcase heater, and essential mounting hardware.
Built with rugged reciprocating technology, the CR47K6-PFV-875 excels in high-ambient conditions up to 55°C and features superior liquid handling capabilities. Its internal inherent protection (line break) safeguards the motor against thermal and electrical overloads, while the 7.5" x 7.5" bolt mounting pattern ensures standard compatibility with most condenser bases. For technicians performing a compressor change-out, this unit offers the industry-leading reliability expected from the Copeland CR series, providing a cost-effective solution for restoring system efficiency without a full equipment replacement.
Key Benefits- Dual-Refrigerant Compatibility: Optimized for R-22 and R-407C applications with POE oil compatibility.
- High-Ambient Performance: Engineered to maintain stable head pressures and cooling efficiency during extreme temperature peaks.
- Complete Service Kit: The 875 BOM includes a molded plug harness and crankcase heater for faster on-site installation.
- Standard Footprint: Utilizes the universal 7.5-inch square mounting base for seamless mechanical integration.
- Enhanced Motor Protection: Features internal line-break protection to mitigate failure from electrical fluctuations or slugging.
Is the CR47K6-PFV-875 compatible with R-410A systems?
No, this is a reciprocating compressor designed for R-22 or R-407C high-pressure applications. It cannot be used in R-410A systems due to significant differences in operating pressures and lubricant requirements.
Does this unit require a start capacitor?
Yes, as a permanent split capacitor (PSC) motor, it requires a run capacitor (typically 50-60 MFD/440V). In high-torque starting situations, a hard start kit (start capacitor and relay) is recommended to prevent stalled rotors.
Can I use mineral oil with this compressor for R-22?
The CR47K6-PFV-875 typically comes pre-charged with POE oil. While POE is compatible with R-22, you should never mix large quantities of mineral oil into a POE system, as it can interfere with oil return and heat transfer.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
