Carrier HT32CH229 Crankcase Heater
Protect your compressor from the risks of cold-weather startups with the Carrier HT32CH229 Crankcase Heater. As a veteran-grade belt-type heater, this component is engineered to maintain oil temperature above the refrigerant saturation point, effectively preventing refrigerant migration and subsequent oil dilution. Designed for universal fit on compressors with a 5" to 6-1/2" diameter, this heater ensures that the crankcase remains the warmest part of the system during off-cycles, preventing liquid slugging that can lead to catastrophic valve or scroll failure.
For service technicians handling Carrier HVAC parts, the 90" leads provide significant flexibility for routing through complex control boxes and outdoor unit cabinets. This belly-band heater features a rugged construction that stands up to harsh industrial environments, ensuring consistent heat transfer to the compressor shell. Whether you are performing a crankcase heater replacement or a new system installation, matching the exact Carrier part number HT32CH229 is critical for maintaining the intended electrical resistance and thermal output required for high-efficiency operation.
Key Benefits- Optimized Heat Transfer: The belt-style design wraps securely around the compressor base to provide even, direct heating to the oil reservoir.
- Extended Compressor Life: By preventing flooded starts and bearing washout, this heater preserves the mechanical integrity of the compressor's internal components.
- Installation Versatility: Features 90-inch leads and a flexible diameter range of 5 to 6.5 inches, making it compatible with a wide array of residential and commercial Carrier compressor units.
- Critical Protection: Essential for systems located in cold climates where condensing refrigerant naturally migrates to the coldest point of the refrigeration circuit.
How do I check if my crankcase heater is failing?
Technicians should perform a resistance (ohm) check across the leads. An open circuit or "OL" reading typically indicates a break in the heating element, requiring immediate replacement to avoid compressor damage.
When is a crankcase heater mandatory?
A crankcase heater is typically required on systems where the refrigerant charge exceeds the manufacturer’s limit or where long line sets (often over 80 feet) increase the risk of migration during the off-cycle.
Can I install this heater on any compressor diameter?
No, this specific model is designed for a diameter range of 5" to 6-1/2". Ensuring a snug fit is vital for proper thermal conductivity and preventing hot spots on the heater band.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $108.11
-65%$108.11
$37.84Carrier HT32CH229 Crankcase Heater
Protect your compressor from the risks of cold-weather startups with the Carrier HT32CH229 Crankcase Heater. As a veteran-grade belt-type heater, this component is engineered to maintain oil temperature above the refrigerant saturation point, effectively preventing refrigerant migration and subsequent oil dilution. Designed for universal fit on compressors with a 5" to 6-1/2" diameter, this heater ensures that the crankcase remains the warmest part of the system during off-cycles, preventing liquid slugging that can lead to catastrophic valve or scroll failure.
For service technicians handling Carrier HVAC parts, the 90" leads provide significant flexibility for routing through complex control boxes and outdoor unit cabinets. This belly-band heater features a rugged construction that stands up to harsh industrial environments, ensuring consistent heat transfer to the compressor shell. Whether you are performing a crankcase heater replacement or a new system installation, matching the exact Carrier part number HT32CH229 is critical for maintaining the intended electrical resistance and thermal output required for high-efficiency operation.
Key Benefits- Optimized Heat Transfer: The belt-style design wraps securely around the compressor base to provide even, direct heating to the oil reservoir.
- Extended Compressor Life: By preventing flooded starts and bearing washout, this heater preserves the mechanical integrity of the compressor's internal components.
- Installation Versatility: Features 90-inch leads and a flexible diameter range of 5 to 6.5 inches, making it compatible with a wide array of residential and commercial Carrier compressor units.
- Critical Protection: Essential for systems located in cold climates where condensing refrigerant naturally migrates to the coldest point of the refrigeration circuit.
How do I check if my crankcase heater is failing?
Technicians should perform a resistance (ohm) check across the leads. An open circuit or "OL" reading typically indicates a break in the heating element, requiring immediate replacement to avoid compressor damage.
When is a crankcase heater mandatory?
A crankcase heater is typically required on systems where the refrigerant charge exceeds the manufacturer’s limit or where long line sets (often over 80 feet) increase the risk of migration during the off-cycle.
Can I install this heater on any compressor diameter?
No, this specific model is designed for a diameter range of 5" to 6-1/2". Ensuring a snug fit is vital for proper thermal conductivity and preventing hot spots on the heater band.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Protect your compressor from the risks of cold-weather startups with the Carrier HT32CH229 Crankcase Heater. As a veteran-grade belt-type heater, this component is engineered to maintain oil temperature above the refrigerant saturation point, effectively preventing refrigerant migration and subsequent oil dilution. Designed for universal fit on compressors with a 5" to 6-1/2" diameter, this heater ensures that the crankcase remains the warmest part of the system during off-cycles, preventing liquid slugging that can lead to catastrophic valve or scroll failure.
For service technicians handling Carrier HVAC parts, the 90" leads provide significant flexibility for routing through complex control boxes and outdoor unit cabinets. This belly-band heater features a rugged construction that stands up to harsh industrial environments, ensuring consistent heat transfer to the compressor shell. Whether you are performing a crankcase heater replacement or a new system installation, matching the exact Carrier part number HT32CH229 is critical for maintaining the intended electrical resistance and thermal output required for high-efficiency operation.
Key Benefits- Optimized Heat Transfer: The belt-style design wraps securely around the compressor base to provide even, direct heating to the oil reservoir.
- Extended Compressor Life: By preventing flooded starts and bearing washout, this heater preserves the mechanical integrity of the compressor's internal components.
- Installation Versatility: Features 90-inch leads and a flexible diameter range of 5 to 6.5 inches, making it compatible with a wide array of residential and commercial Carrier compressor units.
- Critical Protection: Essential for systems located in cold climates where condensing refrigerant naturally migrates to the coldest point of the refrigeration circuit.
How do I check if my crankcase heater is failing?
Technicians should perform a resistance (ohm) check across the leads. An open circuit or "OL" reading typically indicates a break in the heating element, requiring immediate replacement to avoid compressor damage.
When is a crankcase heater mandatory?
A crankcase heater is typically required on systems where the refrigerant charge exceeds the manufacturer’s limit or where long line sets (often over 80 feet) increase the risk of migration during the off-cycle.
Can I install this heater on any compressor diameter?
No, this specific model is designed for a diameter range of 5" to 6-1/2". Ensuring a snug fit is vital for proper thermal conductivity and preventing hot spots on the heater band.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
