Carrier B034824H01 Assembly
The Carrier B034824H01 Coil Sensor Assembly is a critical OEM replacement part designed for precise evaporator and condenser temperature monitoring in Carrier, Bryant, and Payne HVAC systems. As a genuine thermistor assembly, this component provides real-time data to the system control board, allowing for accurate regulation of the refrigeration cycle. This ensures the unit maintains optimal setpoints while preventing common issues such as evaporator coil freezing or inefficient compressor cycling.
Constructed to meet rigorous factory authorized specifications, this coil sensor provides the exact resistance-to-temperature curve required for 40KMC and 40KMQ series units. Technicians frequently utilize this part when diagnosing HVAC communication errors or inconsistent cooling performance. Its plug-and-play connector and specifically calibrated sensing probe allow for rapid field installation, reducing downtime and ensuring the HVAC control logic functions according to its original engineering design. Proper placement on the return bend or liquid line as specified by the manufacturer is essential for thermal accuracy.
Key Benefits- Precise Thermal Feedback: Delivers accurate analog signals to the microprocessor control board to prevent short cycling and thermal overloads.
- OEM Compatibility: Specifically engineered for Carrier 40KMC and 40KMQ models, ensuring seamless integration with existing wiring harnesses.
- Durable Construction: Built with moisture-resistant materials to withstand the high-humidity environment found directly on cooling coils.
- System Protection: Acts as a primary safeguard against iced coils and low refrigerant symptoms by alerting the system to abnormal temperature variances.
How do I verify if the B034824H01 sensor is failing?
Technicians should perform a multimeter resistance test. Compare the Ohms reading against the standard Carrier thermistor resistance chart at a known temperature; a wide variance or an "open" reading indicates sensor failure.
Where is this sensor typically located?
This coil sensor assembly is usually clipped onto the evaporator coil copper tubing to monitor saturation temperature, though it may also be found on the outdoor condenser coil in heat pump applications.
Can I use a generic 10k ohm sensor instead?
Using non-OEM sensors is not recommended. The Carrier B034824H01 is calibrated to a specific NTC thermistor curve. An incorrect resistance value will cause the control board to misinterpret temperatures, leading to system lockouts or efficiency loss.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $78.15
-65%$78.15
$27.35Carrier B034824H01 Assembly
The Carrier B034824H01 Coil Sensor Assembly is a critical OEM replacement part designed for precise evaporator and condenser temperature monitoring in Carrier, Bryant, and Payne HVAC systems. As a genuine thermistor assembly, this component provides real-time data to the system control board, allowing for accurate regulation of the refrigeration cycle. This ensures the unit maintains optimal setpoints while preventing common issues such as evaporator coil freezing or inefficient compressor cycling.
Constructed to meet rigorous factory authorized specifications, this coil sensor provides the exact resistance-to-temperature curve required for 40KMC and 40KMQ series units. Technicians frequently utilize this part when diagnosing HVAC communication errors or inconsistent cooling performance. Its plug-and-play connector and specifically calibrated sensing probe allow for rapid field installation, reducing downtime and ensuring the HVAC control logic functions according to its original engineering design. Proper placement on the return bend or liquid line as specified by the manufacturer is essential for thermal accuracy.
Key Benefits- Precise Thermal Feedback: Delivers accurate analog signals to the microprocessor control board to prevent short cycling and thermal overloads.
- OEM Compatibility: Specifically engineered for Carrier 40KMC and 40KMQ models, ensuring seamless integration with existing wiring harnesses.
- Durable Construction: Built with moisture-resistant materials to withstand the high-humidity environment found directly on cooling coils.
- System Protection: Acts as a primary safeguard against iced coils and low refrigerant symptoms by alerting the system to abnormal temperature variances.
How do I verify if the B034824H01 sensor is failing?
Technicians should perform a multimeter resistance test. Compare the Ohms reading against the standard Carrier thermistor resistance chart at a known temperature; a wide variance or an "open" reading indicates sensor failure.
Where is this sensor typically located?
This coil sensor assembly is usually clipped onto the evaporator coil copper tubing to monitor saturation temperature, though it may also be found on the outdoor condenser coil in heat pump applications.
Can I use a generic 10k ohm sensor instead?
Using non-OEM sensors is not recommended. The Carrier B034824H01 is calibrated to a specific NTC thermistor curve. An incorrect resistance value will cause the control board to misinterpret temperatures, leading to system lockouts or efficiency loss.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Carrier B034824H01 Coil Sensor Assembly is a critical OEM replacement part designed for precise evaporator and condenser temperature monitoring in Carrier, Bryant, and Payne HVAC systems. As a genuine thermistor assembly, this component provides real-time data to the system control board, allowing for accurate regulation of the refrigeration cycle. This ensures the unit maintains optimal setpoints while preventing common issues such as evaporator coil freezing or inefficient compressor cycling.
Constructed to meet rigorous factory authorized specifications, this coil sensor provides the exact resistance-to-temperature curve required for 40KMC and 40KMQ series units. Technicians frequently utilize this part when diagnosing HVAC communication errors or inconsistent cooling performance. Its plug-and-play connector and specifically calibrated sensing probe allow for rapid field installation, reducing downtime and ensuring the HVAC control logic functions according to its original engineering design. Proper placement on the return bend or liquid line as specified by the manufacturer is essential for thermal accuracy.
Key Benefits- Precise Thermal Feedback: Delivers accurate analog signals to the microprocessor control board to prevent short cycling and thermal overloads.
- OEM Compatibility: Specifically engineered for Carrier 40KMC and 40KMQ models, ensuring seamless integration with existing wiring harnesses.
- Durable Construction: Built with moisture-resistant materials to withstand the high-humidity environment found directly on cooling coils.
- System Protection: Acts as a primary safeguard against iced coils and low refrigerant symptoms by alerting the system to abnormal temperature variances.
How do I verify if the B034824H01 sensor is failing?
Technicians should perform a multimeter resistance test. Compare the Ohms reading against the standard Carrier thermistor resistance chart at a known temperature; a wide variance or an "open" reading indicates sensor failure.
Where is this sensor typically located?
This coil sensor assembly is usually clipped onto the evaporator coil copper tubing to monitor saturation temperature, though it may also be found on the outdoor condenser coil in heat pump applications.
Can I use a generic 10k ohm sensor instead?
Using non-OEM sensors is not recommended. The Carrier B034824H01 is calibrated to a specific NTC thermistor curve. An incorrect resistance value will cause the control board to misinterpret temperatures, leading to system lockouts or efficiency loss.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
