Carrier 349336-764 Inducer Motor Kit
The Carrier 349336-764 Inducer Motor Kit is the verified Factory Authorized Parts (FAP) direct replacement for the legacy 326628-764 and 347822-764 assemblies. Designed for high-efficiency Carrier, Bryant, and Payne gas furnaces, this draft inducer kit is essential for maintaining proper combustion airflow and venting flue gases through the heat exchanger. This dual-speed motor operates on a standard 115V/60Hz single-phase circuit, delivering a 2-speed performance range of 2000 to 3000 RPM. As a veteran-grade furnace draft inducer replacement, it includes the internal cooling blade to prevent thermal overload and ensure consistent pressure switch activation, which is critical for avoiding burner lock-outs.
This comprehensive kit simplifies field repairs by including the draft inducer assembly, mounting screws, a pre-cut gasket to ensure a gas-tight seal, and an adapter wiring harness for seamless backwards compatibility. When troubleshooting a noisy furnace inducer motor or a failing combustion blower, technicians prefer this genuine Carrier OEM parts kit because it eliminates the alignment issues common with universal aftermarket motors. By restoring the precise static pressure required for safe furnace cycles, this assembly maintains the manufacturer's specified efficiency and prevents carbon monoxide risks associated with poor ventilation.
Key Benefits for HVAC Professionals:- Direct OEM Fit: Drop-in replacement for Carrier 349336-764, ensuring precise mounting hole alignment and electrical connector compatibility.
- Broad Compatibility: Replaces 326628-764 and 347822-764 across multiple Carrier, Bryant, and Payne 80% and 90% AFUE furnace families.
- High-Performance Dual-Speed: Features a high-quality 115V inducer motor capable of 2000/3000 RPM for exact draft modulation.
- Complete Hardware Kit: Includes the essential gasket, seven mounting screws, and a harness adapter to reduce time on site.
- Enhanced System Safety: Engineered to pull exhaust gases reliably, preventing pressure switch trips and combustion failures.
Is the 349336-764 the correct replacement for the 326628-764?
Yes, the 349336-764 is the official FAP (Factory Authorized Part) replacement. Note that the housing design has been updated and may look different from the original legacy unit, but it is engineered to fit the same furnace mounting points.
What are the electrical specifications for this motor?
This is a 115-volt, 60 Hz, single-phase motor with an amperage rating of approximately 0.44/1.52. It is integrated into a 2-speed operation system (2000/3000 RPM) to match the furnace's heating stages.
Why is my furnace pressure switch not closing with the old motor?
If the inducer motor is failing to reach its designated RPM or the internal fan blade is fouled, it cannot create the necessary vacuum to close the pressure switch. Replacing the assembly with this OEM inducer motor kit restores the factory-spec draft required for the ignition sequence.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Carrier 349336-764 Inducer Motor Kit
The Carrier 349336-764 Inducer Motor Kit is the verified Factory Authorized Parts (FAP) direct replacement for the legacy 326628-764 and 347822-764 assemblies. Designed for high-efficiency Carrier, Bryant, and Payne gas furnaces, this draft inducer kit is essential for maintaining proper combustion airflow and venting flue gases through the heat exchanger. This dual-speed motor operates on a standard 115V/60Hz single-phase circuit, delivering a 2-speed performance range of 2000 to 3000 RPM. As a veteran-grade furnace draft inducer replacement, it includes the internal cooling blade to prevent thermal overload and ensure consistent pressure switch activation, which is critical for avoiding burner lock-outs.
This comprehensive kit simplifies field repairs by including the draft inducer assembly, mounting screws, a pre-cut gasket to ensure a gas-tight seal, and an adapter wiring harness for seamless backwards compatibility. When troubleshooting a noisy furnace inducer motor or a failing combustion blower, technicians prefer this genuine Carrier OEM parts kit because it eliminates the alignment issues common with universal aftermarket motors. By restoring the precise static pressure required for safe furnace cycles, this assembly maintains the manufacturer's specified efficiency and prevents carbon monoxide risks associated with poor ventilation.
Key Benefits for HVAC Professionals:- Direct OEM Fit: Drop-in replacement for Carrier 349336-764, ensuring precise mounting hole alignment and electrical connector compatibility.
- Broad Compatibility: Replaces 326628-764 and 347822-764 across multiple Carrier, Bryant, and Payne 80% and 90% AFUE furnace families.
- High-Performance Dual-Speed: Features a high-quality 115V inducer motor capable of 2000/3000 RPM for exact draft modulation.
- Complete Hardware Kit: Includes the essential gasket, seven mounting screws, and a harness adapter to reduce time on site.
- Enhanced System Safety: Engineered to pull exhaust gases reliably, preventing pressure switch trips and combustion failures.
Is the 349336-764 the correct replacement for the 326628-764?
Yes, the 349336-764 is the official FAP (Factory Authorized Part) replacement. Note that the housing design has been updated and may look different from the original legacy unit, but it is engineered to fit the same furnace mounting points.
What are the electrical specifications for this motor?
This is a 115-volt, 60 Hz, single-phase motor with an amperage rating of approximately 0.44/1.52. It is integrated into a 2-speed operation system (2000/3000 RPM) to match the furnace's heating stages.
Why is my furnace pressure switch not closing with the old motor?
If the inducer motor is failing to reach its designated RPM or the internal fan blade is fouled, it cannot create the necessary vacuum to close the pressure switch. Replacing the assembly with this OEM inducer motor kit restores the factory-spec draft required for the ignition sequence.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Carrier 349336-764 Inducer Motor Kit is the verified Factory Authorized Parts (FAP) direct replacement for the legacy 326628-764 and 347822-764 assemblies. Designed for high-efficiency Carrier, Bryant, and Payne gas furnaces, this draft inducer kit is essential for maintaining proper combustion airflow and venting flue gases through the heat exchanger. This dual-speed motor operates on a standard 115V/60Hz single-phase circuit, delivering a 2-speed performance range of 2000 to 3000 RPM. As a veteran-grade furnace draft inducer replacement, it includes the internal cooling blade to prevent thermal overload and ensure consistent pressure switch activation, which is critical for avoiding burner lock-outs.
This comprehensive kit simplifies field repairs by including the draft inducer assembly, mounting screws, a pre-cut gasket to ensure a gas-tight seal, and an adapter wiring harness for seamless backwards compatibility. When troubleshooting a noisy furnace inducer motor or a failing combustion blower, technicians prefer this genuine Carrier OEM parts kit because it eliminates the alignment issues common with universal aftermarket motors. By restoring the precise static pressure required for safe furnace cycles, this assembly maintains the manufacturer's specified efficiency and prevents carbon monoxide risks associated with poor ventilation.
Key Benefits for HVAC Professionals:- Direct OEM Fit: Drop-in replacement for Carrier 349336-764, ensuring precise mounting hole alignment and electrical connector compatibility.
- Broad Compatibility: Replaces 326628-764 and 347822-764 across multiple Carrier, Bryant, and Payne 80% and 90% AFUE furnace families.
- High-Performance Dual-Speed: Features a high-quality 115V inducer motor capable of 2000/3000 RPM for exact draft modulation.
- Complete Hardware Kit: Includes the essential gasket, seven mounting screws, and a harness adapter to reduce time on site.
- Enhanced System Safety: Engineered to pull exhaust gases reliably, preventing pressure switch trips and combustion failures.
Is the 349336-764 the correct replacement for the 326628-764?
Yes, the 349336-764 is the official FAP (Factory Authorized Part) replacement. Note that the housing design has been updated and may look different from the original legacy unit, but it is engineered to fit the same furnace mounting points.
What are the electrical specifications for this motor?
This is a 115-volt, 60 Hz, single-phase motor with an amperage rating of approximately 0.44/1.52. It is integrated into a 2-speed operation system (2000/3000 RPM) to match the furnace's heating stages.
Why is my furnace pressure switch not closing with the old motor?
If the inducer motor is failing to reach its designated RPM or the internal fan blade is fouled, it cannot create the necessary vacuum to close the pressure switch. Replacing the assembly with this OEM inducer motor kit restores the factory-spec draft required for the ignition sequence.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
