Carrier 327972-764 Gas Valve
The Carrier 327972-764 Gas Valve is a factory authorized replacement part engineered for high-output residential and commercial furnaces. This 2-stage gas valve is designed specifically for 110,000 BTU (110K) units, ensuring precise fuel regulation and steady ignition. Operating on a standard 24V HVAC control system, it is pre-configured for natural gas with a 3.5" WC manifold pressure setting. The 1/2 inch NPT inlet/outlet connections allow for a direct-fit install, reducing time spent on the job site. As a genuine OEM furnace gas valve, it maintains the original equipment’s performance specifications and prevents the common troubleshooting hurdles associated with universal aftermarket components. This assembly includes the manifold, providing a complete gas valve and manifold kit solution for technicians addressing manifold cracks or solenoid failures in Carrier, Bryant, and Payne equipment. This furnace component is the designated successor for legacy part numbers 326648-404 and EF33CW200, making it a critical stock item for maintaining system reliability during peak heating seasons.
Key Benefits- OEM Compatibility: Guaranteed fit for Carrier, Bryant, and Payne 110K BTU furnaces, replacing obsolete 326648-404 and EF33CW200 models.
- Dual-Stage Performance: Supports 2-stage heating cycles for improved energy efficiency and consistent BTU output.
- Complete Assembly: Includes the manifold kit, eliminating the need to source individual fittings and reducing potential leak points.
- Standardized Specs: Features a 1/2" gas line connection and 24-volt solenoid for seamless integration with existing control boards.
Is this valve compatible with LP (Propane) systems?
This specific model is calibrated for natural gas at 3.5" WC. If a conversion to liquid propane is required, a manufacturer-approved LP conversion kit must be used to adjust the spring and orifice settings correctly.
Can I use the 327972-764 to replace a single-stage valve?
No, this is a 2-stage gas valve designed for units with specific multi-stage logic in the furnace control board. Always verify the BTU rating and stage requirements of the specific Carrier HVAC system before installation.
What are the symptoms of a failing gas valve manifold?
Common signs include delayed ignition, "no heat" calls due to failed solenoids, or audible clicking without gas flow. Replacing the entire gas valve/manifold assembly ensures calibrated pressure delivery across all burners.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $318.40
-65%$318.40
$111.44Carrier 327972-764 Gas Valve
The Carrier 327972-764 Gas Valve is a factory authorized replacement part engineered for high-output residential and commercial furnaces. This 2-stage gas valve is designed specifically for 110,000 BTU (110K) units, ensuring precise fuel regulation and steady ignition. Operating on a standard 24V HVAC control system, it is pre-configured for natural gas with a 3.5" WC manifold pressure setting. The 1/2 inch NPT inlet/outlet connections allow for a direct-fit install, reducing time spent on the job site. As a genuine OEM furnace gas valve, it maintains the original equipment’s performance specifications and prevents the common troubleshooting hurdles associated with universal aftermarket components. This assembly includes the manifold, providing a complete gas valve and manifold kit solution for technicians addressing manifold cracks or solenoid failures in Carrier, Bryant, and Payne equipment. This furnace component is the designated successor for legacy part numbers 326648-404 and EF33CW200, making it a critical stock item for maintaining system reliability during peak heating seasons.
Key Benefits- OEM Compatibility: Guaranteed fit for Carrier, Bryant, and Payne 110K BTU furnaces, replacing obsolete 326648-404 and EF33CW200 models.
- Dual-Stage Performance: Supports 2-stage heating cycles for improved energy efficiency and consistent BTU output.
- Complete Assembly: Includes the manifold kit, eliminating the need to source individual fittings and reducing potential leak points.
- Standardized Specs: Features a 1/2" gas line connection and 24-volt solenoid for seamless integration with existing control boards.
Is this valve compatible with LP (Propane) systems?
This specific model is calibrated for natural gas at 3.5" WC. If a conversion to liquid propane is required, a manufacturer-approved LP conversion kit must be used to adjust the spring and orifice settings correctly.
Can I use the 327972-764 to replace a single-stage valve?
No, this is a 2-stage gas valve designed for units with specific multi-stage logic in the furnace control board. Always verify the BTU rating and stage requirements of the specific Carrier HVAC system before installation.
What are the symptoms of a failing gas valve manifold?
Common signs include delayed ignition, "no heat" calls due to failed solenoids, or audible clicking without gas flow. Replacing the entire gas valve/manifold assembly ensures calibrated pressure delivery across all burners.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Carrier 327972-764 Gas Valve is a factory authorized replacement part engineered for high-output residential and commercial furnaces. This 2-stage gas valve is designed specifically for 110,000 BTU (110K) units, ensuring precise fuel regulation and steady ignition. Operating on a standard 24V HVAC control system, it is pre-configured for natural gas with a 3.5" WC manifold pressure setting. The 1/2 inch NPT inlet/outlet connections allow for a direct-fit install, reducing time spent on the job site. As a genuine OEM furnace gas valve, it maintains the original equipment’s performance specifications and prevents the common troubleshooting hurdles associated with universal aftermarket components. This assembly includes the manifold, providing a complete gas valve and manifold kit solution for technicians addressing manifold cracks or solenoid failures in Carrier, Bryant, and Payne equipment. This furnace component is the designated successor for legacy part numbers 326648-404 and EF33CW200, making it a critical stock item for maintaining system reliability during peak heating seasons.
Key Benefits- OEM Compatibility: Guaranteed fit for Carrier, Bryant, and Payne 110K BTU furnaces, replacing obsolete 326648-404 and EF33CW200 models.
- Dual-Stage Performance: Supports 2-stage heating cycles for improved energy efficiency and consistent BTU output.
- Complete Assembly: Includes the manifold kit, eliminating the need to source individual fittings and reducing potential leak points.
- Standardized Specs: Features a 1/2" gas line connection and 24-volt solenoid for seamless integration with existing control boards.
Is this valve compatible with LP (Propane) systems?
This specific model is calibrated for natural gas at 3.5" WC. If a conversion to liquid propane is required, a manufacturer-approved LP conversion kit must be used to adjust the spring and orifice settings correctly.
Can I use the 327972-764 to replace a single-stage valve?
No, this is a 2-stage gas valve designed for units with specific multi-stage logic in the furnace control board. Always verify the BTU rating and stage requirements of the specific Carrier HVAC system before installation.
What are the symptoms of a failing gas valve manifold?
Common signs include delayed ignition, "no heat" calls due to failed solenoids, or audible clicking without gas flow. Replacing the entire gas valve/manifold assembly ensures calibrated pressure delivery across all burners.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
