Carrier 17400103000052 Run Capacitor
When you're out on a service call and finding a compressor struggling to turn over or a condenser fan motor that’s humming but not spinning, a failed capacitor is the usual suspect. This genuine Carrier 17400103000052 is a professional-grade 45 MFD 250V dry or oil-filled run capacitor designed specifically for Carrier, Bryant, and Payne residential and commercial HVAC systems. This 45 microfarad capacitor is a critical component for maintaining secondary winding phase displacement, ensuring your equipment operates with the proper torque and electrical efficiency required by OEM specifications. Built with a round run capacitor form factor, it fits standard mounting brackets and straps, making for a quick swap during an air conditioning repair.
The Carrier 17400103000052 features a 250V rating, providing a stable operating range for specific high-efficiency motors where a lower voltage profile is required. For any HVAC technician, verifying the microfarad (µF) rating and voltage compatibility is mandatory to prevent premature motor winding failure or overheating. This OEM replacement part is engineered to withstand the demanding cycles of modern cooling systems, providing a reliable solution when performing a capacitor replacement on site.
Notes
Item is Non Cancelable / Non Returnable
Key Benefits- Precise 45 MFD Rating: Ensures optimal phase angle for motor efficiency and reduced amp draw.
- Genuine OEM Carrier Part: Guaranteed compatibility with specific Carrier, Bryant, and Payne air handlers and condensers.
- Compact Round Housing: Standard round run capacitor dimensions allow for seamless installation in existing electrical cabinets.
- 250V Rated Performance: Designed to meet the specific voltage requirements of specialized HVAC motors and components.
- Industrial Build Quality: Constructed to manage the thermal stress of continuous duty cycles without frequent failure.
Can I use this 250V capacitor if my old one was 370V?
No. You should always match the voltage rating of the original part or go higher. Using a 250V capacitor where a 370V or 440V part is required will lead to immediate failure. Always check the motor nameplate for the specific voltage and MFD requirements.
What are the signs that this run capacitor has failed?
The most common visual indicator is a bulging or swollen top. Electrically, if you test the terminals with a multimeter and the Microfarad reading is outside the +/- 5% to 10% tolerance, the part must be replaced to protect the compressor.
Does it matter which wire goes on which terminal for a single run capacitor?
For a single (not dual) run capacitor like this 17400103000052, it is non-polarized. However, it is a best practice for HVAC contractors to follow the original wiring diagram to ensure the run and start windings are correctly energized.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $17.90
-65%$17.90
$6.26Carrier 17400103000052 Run Capacitor
When you're out on a service call and finding a compressor struggling to turn over or a condenser fan motor that’s humming but not spinning, a failed capacitor is the usual suspect. This genuine Carrier 17400103000052 is a professional-grade 45 MFD 250V dry or oil-filled run capacitor designed specifically for Carrier, Bryant, and Payne residential and commercial HVAC systems. This 45 microfarad capacitor is a critical component for maintaining secondary winding phase displacement, ensuring your equipment operates with the proper torque and electrical efficiency required by OEM specifications. Built with a round run capacitor form factor, it fits standard mounting brackets and straps, making for a quick swap during an air conditioning repair.
The Carrier 17400103000052 features a 250V rating, providing a stable operating range for specific high-efficiency motors where a lower voltage profile is required. For any HVAC technician, verifying the microfarad (µF) rating and voltage compatibility is mandatory to prevent premature motor winding failure or overheating. This OEM replacement part is engineered to withstand the demanding cycles of modern cooling systems, providing a reliable solution when performing a capacitor replacement on site.
Notes
Item is Non Cancelable / Non Returnable
Key Benefits- Precise 45 MFD Rating: Ensures optimal phase angle for motor efficiency and reduced amp draw.
- Genuine OEM Carrier Part: Guaranteed compatibility with specific Carrier, Bryant, and Payne air handlers and condensers.
- Compact Round Housing: Standard round run capacitor dimensions allow for seamless installation in existing electrical cabinets.
- 250V Rated Performance: Designed to meet the specific voltage requirements of specialized HVAC motors and components.
- Industrial Build Quality: Constructed to manage the thermal stress of continuous duty cycles without frequent failure.
Can I use this 250V capacitor if my old one was 370V?
No. You should always match the voltage rating of the original part or go higher. Using a 250V capacitor where a 370V or 440V part is required will lead to immediate failure. Always check the motor nameplate for the specific voltage and MFD requirements.
What are the signs that this run capacitor has failed?
The most common visual indicator is a bulging or swollen top. Electrically, if you test the terminals with a multimeter and the Microfarad reading is outside the +/- 5% to 10% tolerance, the part must be replaced to protect the compressor.
Does it matter which wire goes on which terminal for a single run capacitor?
For a single (not dual) run capacitor like this 17400103000052, it is non-polarized. However, it is a best practice for HVAC contractors to follow the original wiring diagram to ensure the run and start windings are correctly energized.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When you're out on a service call and finding a compressor struggling to turn over or a condenser fan motor that’s humming but not spinning, a failed capacitor is the usual suspect. This genuine Carrier 17400103000052 is a professional-grade 45 MFD 250V dry or oil-filled run capacitor designed specifically for Carrier, Bryant, and Payne residential and commercial HVAC systems. This 45 microfarad capacitor is a critical component for maintaining secondary winding phase displacement, ensuring your equipment operates with the proper torque and electrical efficiency required by OEM specifications. Built with a round run capacitor form factor, it fits standard mounting brackets and straps, making for a quick swap during an air conditioning repair.
The Carrier 17400103000052 features a 250V rating, providing a stable operating range for specific high-efficiency motors where a lower voltage profile is required. For any HVAC technician, verifying the microfarad (µF) rating and voltage compatibility is mandatory to prevent premature motor winding failure or overheating. This OEM replacement part is engineered to withstand the demanding cycles of modern cooling systems, providing a reliable solution when performing a capacitor replacement on site.
Notes
Item is Non Cancelable / Non Returnable
Key Benefits- Precise 45 MFD Rating: Ensures optimal phase angle for motor efficiency and reduced amp draw.
- Genuine OEM Carrier Part: Guaranteed compatibility with specific Carrier, Bryant, and Payne air handlers and condensers.
- Compact Round Housing: Standard round run capacitor dimensions allow for seamless installation in existing electrical cabinets.
- 250V Rated Performance: Designed to meet the specific voltage requirements of specialized HVAC motors and components.
- Industrial Build Quality: Constructed to manage the thermal stress of continuous duty cycles without frequent failure.
Can I use this 250V capacitor if my old one was 370V?
No. You should always match the voltage rating of the original part or go higher. Using a 250V capacitor where a 370V or 440V part is required will lead to immediate failure. Always check the motor nameplate for the specific voltage and MFD requirements.
What are the signs that this run capacitor has failed?
The most common visual indicator is a bulging or swollen top. Electrically, if you test the terminals with a multimeter and the Microfarad reading is outside the +/- 5% to 10% tolerance, the part must be replaced to protect the compressor.
Does it matter which wire goes on which terminal for a single run capacitor?
For a single (not dual) run capacitor like this 17400103000052, it is non-polarized. However, it is a best practice for HVAC contractors to follow the original wiring diagram to ensure the run and start windings are correctly energized.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
