Carrier 06EA660164 Valve
For industrial refrigeration and commercial HVAC applications, the Carrier 06EA660164 Carlyle Service Valve is a critical 2-1/8 inch suction SRV engineered for high-capacity performance. Specifically designed as the direct factory-authorized upgrade for the obsolete 06EA660091 model, this 4-bolt ODS brass service valve provides superior corrosion resistance compared to legacy cast iron versions. It is built for seamless integration with Carlyle 06E compressors (50-99 CFM) and industrial refrigeration systems, ensuring precise control over refrigerant flow and system isolation during critical maintenance or charging cycles. The 7.7 x 13.9-inch genuine OEM compressor service valve facilitates accurate pressure measurement and efficient refrigerant recovery. As a technician-grade component, it features a 2-1/8 inch sweat connection and a 3-1/16 inch square bolt hole spacing for a secure, leak-proof seal under extreme industrial conditions. Choosing this brass suction side valve ensures full compatibility with modern service standards while strictly maintaining the engineering specifications of your Carlyle or Carrier equipment.
Key Benefits for Contractors:- Universal Compatibility: Serves as the direct replacement for the obsolete Carlyle 06EA660091 cast iron valve, fitting 06E series reciprocating compressors.
- Superior Metallurgy: Forged from high-grade brass to eliminate the rust and degradation common in older cast iron suction valves.
- Complete Installation Profile: Designed for an ODS sweat connection, matching 2-1/8 inch suction lines for standard industrial piping.
- Field Efficiency: Supports rapid system isolation, allowing for faster evacuation, charging, and pressure monitoring without full system shutdowns.
- Maintenance Optimized: The 4-bolt flange design provides a stable, high-torque sealing surface to prevent suction-side leaks in high-vibration environments.
Is the 06EA660164 a direct drop-in for the older 06EA660091?
Yes, it is the official Carlyle replacement. However, because the brass body is slightly deeper than the legacy cast iron version, you must use 1/2-inch longer hex head cap screws (5/8-11 x 5") for secure mounting. The standard 6G65-1061 gasket remains compatible.
Does this valve include the necessary mounting hardware?
Typically, as a service kit, it includes the required gasket and the updated longer fasteners needed for the brass-to-compressor assembly. Always verify your current bolt length during extraction.
Can I use this on the discharge side?
No, this specific part number is engineered as a suction side SRV valve. Using a suction-designed valve on the high-pressure discharge side can lead to component failure and system safety risks.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Carrier 06EA660164 Valve
For industrial refrigeration and commercial HVAC applications, the Carrier 06EA660164 Carlyle Service Valve is a critical 2-1/8 inch suction SRV engineered for high-capacity performance. Specifically designed as the direct factory-authorized upgrade for the obsolete 06EA660091 model, this 4-bolt ODS brass service valve provides superior corrosion resistance compared to legacy cast iron versions. It is built for seamless integration with Carlyle 06E compressors (50-99 CFM) and industrial refrigeration systems, ensuring precise control over refrigerant flow and system isolation during critical maintenance or charging cycles. The 7.7 x 13.9-inch genuine OEM compressor service valve facilitates accurate pressure measurement and efficient refrigerant recovery. As a technician-grade component, it features a 2-1/8 inch sweat connection and a 3-1/16 inch square bolt hole spacing for a secure, leak-proof seal under extreme industrial conditions. Choosing this brass suction side valve ensures full compatibility with modern service standards while strictly maintaining the engineering specifications of your Carlyle or Carrier equipment.
Key Benefits for Contractors:- Universal Compatibility: Serves as the direct replacement for the obsolete Carlyle 06EA660091 cast iron valve, fitting 06E series reciprocating compressors.
- Superior Metallurgy: Forged from high-grade brass to eliminate the rust and degradation common in older cast iron suction valves.
- Complete Installation Profile: Designed for an ODS sweat connection, matching 2-1/8 inch suction lines for standard industrial piping.
- Field Efficiency: Supports rapid system isolation, allowing for faster evacuation, charging, and pressure monitoring without full system shutdowns.
- Maintenance Optimized: The 4-bolt flange design provides a stable, high-torque sealing surface to prevent suction-side leaks in high-vibration environments.
Is the 06EA660164 a direct drop-in for the older 06EA660091?
Yes, it is the official Carlyle replacement. However, because the brass body is slightly deeper than the legacy cast iron version, you must use 1/2-inch longer hex head cap screws (5/8-11 x 5") for secure mounting. The standard 6G65-1061 gasket remains compatible.
Does this valve include the necessary mounting hardware?
Typically, as a service kit, it includes the required gasket and the updated longer fasteners needed for the brass-to-compressor assembly. Always verify your current bolt length during extraction.
Can I use this on the discharge side?
No, this specific part number is engineered as a suction side SRV valve. Using a suction-designed valve on the high-pressure discharge side can lead to component failure and system safety risks.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
For industrial refrigeration and commercial HVAC applications, the Carrier 06EA660164 Carlyle Service Valve is a critical 2-1/8 inch suction SRV engineered for high-capacity performance. Specifically designed as the direct factory-authorized upgrade for the obsolete 06EA660091 model, this 4-bolt ODS brass service valve provides superior corrosion resistance compared to legacy cast iron versions. It is built for seamless integration with Carlyle 06E compressors (50-99 CFM) and industrial refrigeration systems, ensuring precise control over refrigerant flow and system isolation during critical maintenance or charging cycles. The 7.7 x 13.9-inch genuine OEM compressor service valve facilitates accurate pressure measurement and efficient refrigerant recovery. As a technician-grade component, it features a 2-1/8 inch sweat connection and a 3-1/16 inch square bolt hole spacing for a secure, leak-proof seal under extreme industrial conditions. Choosing this brass suction side valve ensures full compatibility with modern service standards while strictly maintaining the engineering specifications of your Carlyle or Carrier equipment.
Key Benefits for Contractors:- Universal Compatibility: Serves as the direct replacement for the obsolete Carlyle 06EA660091 cast iron valve, fitting 06E series reciprocating compressors.
- Superior Metallurgy: Forged from high-grade brass to eliminate the rust and degradation common in older cast iron suction valves.
- Complete Installation Profile: Designed for an ODS sweat connection, matching 2-1/8 inch suction lines for standard industrial piping.
- Field Efficiency: Supports rapid system isolation, allowing for faster evacuation, charging, and pressure monitoring without full system shutdowns.
- Maintenance Optimized: The 4-bolt flange design provides a stable, high-torque sealing surface to prevent suction-side leaks in high-vibration environments.
Is the 06EA660164 a direct drop-in for the older 06EA660091?
Yes, it is the official Carlyle replacement. However, because the brass body is slightly deeper than the legacy cast iron version, you must use 1/2-inch longer hex head cap screws (5/8-11 x 5") for secure mounting. The standard 6G65-1061 gasket remains compatible.
Does this valve include the necessary mounting hardware?
Typically, as a service kit, it includes the required gasket and the updated longer fasteners needed for the brass-to-compressor assembly. Always verify your current bolt length during extraction.
Can I use this on the discharge side?
No, this specific part number is engineered as a suction side SRV valve. Using a suction-designed valve on the high-pressure discharge side can lead to component failure and system safety risks.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
