Browning AX90 Belt
The Browning AX90 Belt is a heavy-duty Gripnotch V-Belt engineered for high-torque HVACR and industrial drive applications. Featuring a 92.2" outside diameter and a 91.3" pitch length, this AX-section belt is constructed with an EPDM rubber compound that resists heat up to 250°F. Unlike standard wrapped belts, the precision-molded cogs of the AX90 cogged V-belt increase surface area for superior heat dissipation and allow for operation on smaller diameter sheaves without excessive stress on the internal cords. The raw-edge sidewalls provide an aggressive grip on pulley surfaces, minimizing slip and maximizing energy efficiency up to 98%.
For contractors managing multi-belt drives, these units utilize the "Code 1" matching system, ensuring tighter tolerances than RMA standards for balanced load distribution. The industrial power transmission belt is reinforced with high-strength synthetic cords to maintain consistent tension and reduce elongation over time. This 1/2" top width part is an essential component for commercial air handlers, cooling towers, and exhaust fans.
- Enhanced Flexibility: Molded cogs allow for smaller bending radii and higher speed ratios without compromising structural integrity.
- EPDM Construction: Built for harsh environments, providing resistance to oil, ozone, and extreme temperature fluctuations.
- Maximum Efficiency: Raw-edge design eliminates the "slip-and-grip" cycle common in wrapped belts, delivering consistent horsepower transfer.
- Precision Tolerance: Code 1 matching prevents uneven belt wear and vibration in multi-groove sheave setups.
Common Questions
What are the exact dimensions of the Browning AX90?
The AX90 conforms to standard AX profile specifications with a 1/2-inch top width and a 5/16-inch thickness. Its measured outside circumference is 92.2 inches, while its pitch length is 91.3 inches.
Can I use an AX90 belt on a standard A-section pulley?
Yes, AX Gripnotch belts are fully compatible with standard A-section (Classical) sheaves. The notched design actually provides an upgrade in performance and heat management over standard fractional horsepower or wrapped A-belts.
Are Gen I and Gen II TorqTitan belts interchangeable?
While they share the same dimensions, it is recommended to replace belts in sets. To ensure optimal drive synchronization and prevent premature wear, do not mix original and Gen II belts on the same drive.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $29.05
-65%$29.05
$10.17Browning AX90 Belt
The Browning AX90 Belt is a heavy-duty Gripnotch V-Belt engineered for high-torque HVACR and industrial drive applications. Featuring a 92.2" outside diameter and a 91.3" pitch length, this AX-section belt is constructed with an EPDM rubber compound that resists heat up to 250°F. Unlike standard wrapped belts, the precision-molded cogs of the AX90 cogged V-belt increase surface area for superior heat dissipation and allow for operation on smaller diameter sheaves without excessive stress on the internal cords. The raw-edge sidewalls provide an aggressive grip on pulley surfaces, minimizing slip and maximizing energy efficiency up to 98%.
For contractors managing multi-belt drives, these units utilize the "Code 1" matching system, ensuring tighter tolerances than RMA standards for balanced load distribution. The industrial power transmission belt is reinforced with high-strength synthetic cords to maintain consistent tension and reduce elongation over time. This 1/2" top width part is an essential component for commercial air handlers, cooling towers, and exhaust fans.
- Enhanced Flexibility: Molded cogs allow for smaller bending radii and higher speed ratios without compromising structural integrity.
- EPDM Construction: Built for harsh environments, providing resistance to oil, ozone, and extreme temperature fluctuations.
- Maximum Efficiency: Raw-edge design eliminates the "slip-and-grip" cycle common in wrapped belts, delivering consistent horsepower transfer.
- Precision Tolerance: Code 1 matching prevents uneven belt wear and vibration in multi-groove sheave setups.
Common Questions
What are the exact dimensions of the Browning AX90?
The AX90 conforms to standard AX profile specifications with a 1/2-inch top width and a 5/16-inch thickness. Its measured outside circumference is 92.2 inches, while its pitch length is 91.3 inches.
Can I use an AX90 belt on a standard A-section pulley?
Yes, AX Gripnotch belts are fully compatible with standard A-section (Classical) sheaves. The notched design actually provides an upgrade in performance and heat management over standard fractional horsepower or wrapped A-belts.
Are Gen I and Gen II TorqTitan belts interchangeable?
While they share the same dimensions, it is recommended to replace belts in sets. To ensure optimal drive synchronization and prevent premature wear, do not mix original and Gen II belts on the same drive.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Browning AX90 Belt is a heavy-duty Gripnotch V-Belt engineered for high-torque HVACR and industrial drive applications. Featuring a 92.2" outside diameter and a 91.3" pitch length, this AX-section belt is constructed with an EPDM rubber compound that resists heat up to 250°F. Unlike standard wrapped belts, the precision-molded cogs of the AX90 cogged V-belt increase surface area for superior heat dissipation and allow for operation on smaller diameter sheaves without excessive stress on the internal cords. The raw-edge sidewalls provide an aggressive grip on pulley surfaces, minimizing slip and maximizing energy efficiency up to 98%.
For contractors managing multi-belt drives, these units utilize the "Code 1" matching system, ensuring tighter tolerances than RMA standards for balanced load distribution. The industrial power transmission belt is reinforced with high-strength synthetic cords to maintain consistent tension and reduce elongation over time. This 1/2" top width part is an essential component for commercial air handlers, cooling towers, and exhaust fans.
- Enhanced Flexibility: Molded cogs allow for smaller bending radii and higher speed ratios without compromising structural integrity.
- EPDM Construction: Built for harsh environments, providing resistance to oil, ozone, and extreme temperature fluctuations.
- Maximum Efficiency: Raw-edge design eliminates the "slip-and-grip" cycle common in wrapped belts, delivering consistent horsepower transfer.
- Precision Tolerance: Code 1 matching prevents uneven belt wear and vibration in multi-groove sheave setups.
Common Questions
What are the exact dimensions of the Browning AX90?
The AX90 conforms to standard AX profile specifications with a 1/2-inch top width and a 5/16-inch thickness. Its measured outside circumference is 92.2 inches, while its pitch length is 91.3 inches.
Can I use an AX90 belt on a standard A-section pulley?
Yes, AX Gripnotch belts are fully compatible with standard A-section (Classical) sheaves. The notched design actually provides an upgrade in performance and heat management over standard fractional horsepower or wrapped A-belts.
Are Gen I and Gen II TorqTitan belts interchangeable?
While they share the same dimensions, it is recommended to replace belts in sets. To ensure optimal drive synchronization and prevent premature wear, do not mix original and Gen II belts on the same drive.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
