Browning AX58 Belt
The Browning AX58 Belt is a high-performance Gripnotch V-Belt engineered for demanding HVACR applications where efficiency and thermal dissipation are critical. Featuring a 60.2" outside diameter and a 59.3" pitch length, this AX section belt utilizes premium EPDM rubber construction to withstand extreme temperature fluctuations from -60°F to 250°F. The cogged V-belt design provides superior flexibility, allowing the belt to wrap around smaller A/AX sheaves without the bending resistance found in traditional wrapped belts. This raw-edge sidewall construction maximizes gripping contact with the pulley, ensuring 98% energy efficiency and significantly reducing vibration during high-speed operation. As an industrial power transmission component, the AX58 cogged belt is reinforced with high-tensile cords to resist elongation and maintain precise drive ratios even under heavy shock loads. Utilizing the Browning Code 1 match system, these belts ensure tighter-than-RMA tolerances for a perfect fit in multiple-belt drive configurations.
Key Benefits- EPDM Construction: Resists cracking and heat aging in harsh rooftop environments and engine rooms.
- Precision Molded Cogs: Increases surface area for rapid heat dissipation and allows for smaller sheave diameters.
- Code 1 Matching: Guarantees uniform length across multiple belts to eliminate uneven load distribution.
- Raw-Edge Sidewalls: Provides a higher coefficient of friction for better torque transmission and less sliage.
What is the difference between an A58 and an AX58 belt?
The AX58 is a cogged (notched) belt designed for higher efficiency and better heat dissipation compared to the standard A58 wrapped belt. While they share the same dimensions, the AX58 allows for higher horsepower ratings and improved flex life over small pulleys.
Can I mix original and Gen II TorqTitan belts on the same drive?
It is not recommended to mix original Browning TorqTitan belts with Gen II versions on the same application. For optimal performance and to prevent premature wear, replace the entire set at once to ensure matched tensioning.
What pulleys are compatible with the AX58?
The AX58 is compatible with standard A or AX section sheaves. It is commonly used in air handlers, cooling towers, and industrial exhaust fans requiring reliable power transmission.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Browning AX58 Belt
The Browning AX58 Belt is a high-performance Gripnotch V-Belt engineered for demanding HVACR applications where efficiency and thermal dissipation are critical. Featuring a 60.2" outside diameter and a 59.3" pitch length, this AX section belt utilizes premium EPDM rubber construction to withstand extreme temperature fluctuations from -60°F to 250°F. The cogged V-belt design provides superior flexibility, allowing the belt to wrap around smaller A/AX sheaves without the bending resistance found in traditional wrapped belts. This raw-edge sidewall construction maximizes gripping contact with the pulley, ensuring 98% energy efficiency and significantly reducing vibration during high-speed operation. As an industrial power transmission component, the AX58 cogged belt is reinforced with high-tensile cords to resist elongation and maintain precise drive ratios even under heavy shock loads. Utilizing the Browning Code 1 match system, these belts ensure tighter-than-RMA tolerances for a perfect fit in multiple-belt drive configurations.
Key Benefits- EPDM Construction: Resists cracking and heat aging in harsh rooftop environments and engine rooms.
- Precision Molded Cogs: Increases surface area for rapid heat dissipation and allows for smaller sheave diameters.
- Code 1 Matching: Guarantees uniform length across multiple belts to eliminate uneven load distribution.
- Raw-Edge Sidewalls: Provides a higher coefficient of friction for better torque transmission and less sliage.
What is the difference between an A58 and an AX58 belt?
The AX58 is a cogged (notched) belt designed for higher efficiency and better heat dissipation compared to the standard A58 wrapped belt. While they share the same dimensions, the AX58 allows for higher horsepower ratings and improved flex life over small pulleys.
Can I mix original and Gen II TorqTitan belts on the same drive?
It is not recommended to mix original Browning TorqTitan belts with Gen II versions on the same application. For optimal performance and to prevent premature wear, replace the entire set at once to ensure matched tensioning.
What pulleys are compatible with the AX58?
The AX58 is compatible with standard A or AX section sheaves. It is commonly used in air handlers, cooling towers, and industrial exhaust fans requiring reliable power transmission.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Browning AX58 Belt is a high-performance Gripnotch V-Belt engineered for demanding HVACR applications where efficiency and thermal dissipation are critical. Featuring a 60.2" outside diameter and a 59.3" pitch length, this AX section belt utilizes premium EPDM rubber construction to withstand extreme temperature fluctuations from -60°F to 250°F. The cogged V-belt design provides superior flexibility, allowing the belt to wrap around smaller A/AX sheaves without the bending resistance found in traditional wrapped belts. This raw-edge sidewall construction maximizes gripping contact with the pulley, ensuring 98% energy efficiency and significantly reducing vibration during high-speed operation. As an industrial power transmission component, the AX58 cogged belt is reinforced with high-tensile cords to resist elongation and maintain precise drive ratios even under heavy shock loads. Utilizing the Browning Code 1 match system, these belts ensure tighter-than-RMA tolerances for a perfect fit in multiple-belt drive configurations.
Key Benefits- EPDM Construction: Resists cracking and heat aging in harsh rooftop environments and engine rooms.
- Precision Molded Cogs: Increases surface area for rapid heat dissipation and allows for smaller sheave diameters.
- Code 1 Matching: Guarantees uniform length across multiple belts to eliminate uneven load distribution.
- Raw-Edge Sidewalls: Provides a higher coefficient of friction for better torque transmission and less sliage.
What is the difference between an A58 and an AX58 belt?
The AX58 is a cogged (notched) belt designed for higher efficiency and better heat dissipation compared to the standard A58 wrapped belt. While they share the same dimensions, the AX58 allows for higher horsepower ratings and improved flex life over small pulleys.
Can I mix original and Gen II TorqTitan belts on the same drive?
It is not recommended to mix original Browning TorqTitan belts with Gen II versions on the same application. For optimal performance and to prevent premature wear, replace the entire set at once to ensure matched tensioning.
What pulleys are compatible with the AX58?
The AX58 is compatible with standard A or AX section sheaves. It is commonly used in air handlers, cooling towers, and industrial exhaust fans requiring reliable power transmission.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
