Browning AX39 Belt
The Browning AX39 Belt is a heavy-duty, Gripnotch V-Belt engineered specifically for high-torque HVACR drive systems and industrial motor applications. Featuring a 41.2" Outside Diameter and an AX cross-section, this EPDM rubber belt utilizes precision-molded cogs to increase surface area for superior heat dissipation, making it ideal for the high-ambient environments found in rooftop units and mechanical rooms. The raw-edge sidewalls provide an aggressive pulley grip, minimizing energy loss from slippage and ensuring smooth power transmission in single-belt or matched-set configurations. Built to ARPM IP-20 standards, the high-tensile polyester core resists elongation and maintains proper tension even under heavy shock loads. Professionals rely on the Browning AX39 for its oil and chemical resistance and static-dissipating properties, which are essential for maintaining HVAC drive maintenance standards. The "Code 1" match system ensures that every classical cogged belt meets tighter tolerances than industry standard, facilitating easy replacement for any 41.2 inch OD belt without requiring specialized matching sets.
Key Benefits- Precision-Molded Cogs: Enhances flexibility for small-diameter sheaves and improves airflow around the belt for cooler operation.
- EPDM Synthetic Rubber: Withstands extreme temperatures ranging from -60°F to +250°F, preventing cracking and premature wear.
- Code 1 Match System: Guarantees uniform length across belts of the same size, allowing for simple inventory replacement and consistent performance in multi-groove drives.
- Raw-Edge Construction: Increases frictional contact with the pulley for higher horsepower ratings compared to standard wrapped belts.
- Static Conductivity: Meets ARPM standards for static dissipation, ensuring safety in sensitive HVAC and industrial environments.
Is the AX39 compatible with standard A-section pulleys?
Yes, the AX section is designed to fit standard A-groove sheaves. The cogged "X" profile provides better wrap and efficiency compared to a solid A39 belt, especially on smaller pulleys.
Can I mix this belt with a wrapped motor belt on the same drive?
It is not recommended to mix cogged and wrapped belts on the same multi-groove drive. The Browning AX39 has different friction coefficients and flexibility than a wrapped belt, which can cause uneven load distribution.
What is the difference between pitch length and outside diameter for this belt?
While the outside diameter is 41.2 inches, the pitch length is approximately 40.3 inches. Always verify your drive center distance or use the manufacturer part number (AX39) to ensure a precise fit.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $15.82
-65%$15.82
$5.54Browning AX39 Belt
The Browning AX39 Belt is a heavy-duty, Gripnotch V-Belt engineered specifically for high-torque HVACR drive systems and industrial motor applications. Featuring a 41.2" Outside Diameter and an AX cross-section, this EPDM rubber belt utilizes precision-molded cogs to increase surface area for superior heat dissipation, making it ideal for the high-ambient environments found in rooftop units and mechanical rooms. The raw-edge sidewalls provide an aggressive pulley grip, minimizing energy loss from slippage and ensuring smooth power transmission in single-belt or matched-set configurations. Built to ARPM IP-20 standards, the high-tensile polyester core resists elongation and maintains proper tension even under heavy shock loads. Professionals rely on the Browning AX39 for its oil and chemical resistance and static-dissipating properties, which are essential for maintaining HVAC drive maintenance standards. The "Code 1" match system ensures that every classical cogged belt meets tighter tolerances than industry standard, facilitating easy replacement for any 41.2 inch OD belt without requiring specialized matching sets.
Key Benefits- Precision-Molded Cogs: Enhances flexibility for small-diameter sheaves and improves airflow around the belt for cooler operation.
- EPDM Synthetic Rubber: Withstands extreme temperatures ranging from -60°F to +250°F, preventing cracking and premature wear.
- Code 1 Match System: Guarantees uniform length across belts of the same size, allowing for simple inventory replacement and consistent performance in multi-groove drives.
- Raw-Edge Construction: Increases frictional contact with the pulley for higher horsepower ratings compared to standard wrapped belts.
- Static Conductivity: Meets ARPM standards for static dissipation, ensuring safety in sensitive HVAC and industrial environments.
Is the AX39 compatible with standard A-section pulleys?
Yes, the AX section is designed to fit standard A-groove sheaves. The cogged "X" profile provides better wrap and efficiency compared to a solid A39 belt, especially on smaller pulleys.
Can I mix this belt with a wrapped motor belt on the same drive?
It is not recommended to mix cogged and wrapped belts on the same multi-groove drive. The Browning AX39 has different friction coefficients and flexibility than a wrapped belt, which can cause uneven load distribution.
What is the difference between pitch length and outside diameter for this belt?
While the outside diameter is 41.2 inches, the pitch length is approximately 40.3 inches. Always verify your drive center distance or use the manufacturer part number (AX39) to ensure a precise fit.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Browning AX39 Belt is a heavy-duty, Gripnotch V-Belt engineered specifically for high-torque HVACR drive systems and industrial motor applications. Featuring a 41.2" Outside Diameter and an AX cross-section, this EPDM rubber belt utilizes precision-molded cogs to increase surface area for superior heat dissipation, making it ideal for the high-ambient environments found in rooftop units and mechanical rooms. The raw-edge sidewalls provide an aggressive pulley grip, minimizing energy loss from slippage and ensuring smooth power transmission in single-belt or matched-set configurations. Built to ARPM IP-20 standards, the high-tensile polyester core resists elongation and maintains proper tension even under heavy shock loads. Professionals rely on the Browning AX39 for its oil and chemical resistance and static-dissipating properties, which are essential for maintaining HVAC drive maintenance standards. The "Code 1" match system ensures that every classical cogged belt meets tighter tolerances than industry standard, facilitating easy replacement for any 41.2 inch OD belt without requiring specialized matching sets.
Key Benefits- Precision-Molded Cogs: Enhances flexibility for small-diameter sheaves and improves airflow around the belt for cooler operation.
- EPDM Synthetic Rubber: Withstands extreme temperatures ranging from -60°F to +250°F, preventing cracking and premature wear.
- Code 1 Match System: Guarantees uniform length across belts of the same size, allowing for simple inventory replacement and consistent performance in multi-groove drives.
- Raw-Edge Construction: Increases frictional contact with the pulley for higher horsepower ratings compared to standard wrapped belts.
- Static Conductivity: Meets ARPM standards for static dissipation, ensuring safety in sensitive HVAC and industrial environments.
Is the AX39 compatible with standard A-section pulleys?
Yes, the AX section is designed to fit standard A-groove sheaves. The cogged "X" profile provides better wrap and efficiency compared to a solid A39 belt, especially on smaller pulleys.
Can I mix this belt with a wrapped motor belt on the same drive?
It is not recommended to mix cogged and wrapped belts on the same multi-groove drive. The Browning AX39 has different friction coefficients and flexibility than a wrapped belt, which can cause uneven load distribution.
What is the difference between pitch length and outside diameter for this belt?
While the outside diameter is 41.2 inches, the pitch length is approximately 40.3 inches. Always verify your drive center distance or use the manufacturer part number (AX39) to ensure a precise fit.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
