Browning AX28 Belt
The Browning AX28 Belt is a heavy-duty, cogged V-belt engineered for high-torque HVACR and industrial applications where drive space is limited. Constructed with advanced EPDM rubber, this Type AX Gripnotch belt offers superior heat resistance and ozone protection, maintaining performance in extreme environments ranging from -60°F to +250°F. The 30.2" outside diameter and 29.3" pitch length provide a precise fit for standard A-section sheaves, featuring precision-molded cogs that reduce bending stress and improve flexibility over smaller pulley diameters. This raw-edge design maximizes 98% energy efficiency by increasing surface area for better heat dissipation and improved gripnotch contact, minimizing slippage and vibration. As a Code 1 match belt, it ensures tight tolerances for multi-belt drives, allowing for direct replacement of traditional wrapped belts to increase horsepower capacity and reduce maintenance intervals on critical motor drives.
Key Benefits
- High-Efficiency Power Transfer: The raw-edge sidewall and cogged design provide up to 3% higher efficiency than standard wrapped belts, reducing energy costs in continuous-duty HVAC systems.
- Extended Service Life: Advanced EPDM construction resists oil, chemicals, and environmental degradation while maintaining flexibility under high-speed operation.
- Reduced Maintenance: High-strength synthetic fiber cords minimize stretching, ensuring consistent tension and reducing the need for frequent drive adjustments.
- Optimized Cooling: Deep-molded notches increase airflow and surface area, allowing the belt to run cooler and preventing premature failure caused by thermal stress.
Common Questions
Can I use a Browning AX28 to replace a standard A28 wrapped belt?
Yes. AX28 Gripnotch belts are fully compatible with standard A-section pulleys. The notched design is often preferred for smaller sheave diameters because it handles tighter bends with less internal friction and heat buildup than a smooth-backed belt.
What is the difference between pitch length and outside diameter for an AX28?
For the Browning AX28, the outside diameter is approximately 30.2 inches, while the pitch length (the effective length for performance calculations) is 29.3 inches. Always confirm the belt section width (1/2") and thickness (5/16") to ensure a proper seat in the pulley groove.
Is the AX28 belt static conducting?
Yes, these belts are manufactured to static conducting standards, making them suitable for use in environments where the prevention of static buildup is necessary for safety or equipment protection.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $12.99
-65%$12.99
$4.55Browning AX28 Belt
The Browning AX28 Belt is a heavy-duty, cogged V-belt engineered for high-torque HVACR and industrial applications where drive space is limited. Constructed with advanced EPDM rubber, this Type AX Gripnotch belt offers superior heat resistance and ozone protection, maintaining performance in extreme environments ranging from -60°F to +250°F. The 30.2" outside diameter and 29.3" pitch length provide a precise fit for standard A-section sheaves, featuring precision-molded cogs that reduce bending stress and improve flexibility over smaller pulley diameters. This raw-edge design maximizes 98% energy efficiency by increasing surface area for better heat dissipation and improved gripnotch contact, minimizing slippage and vibration. As a Code 1 match belt, it ensures tight tolerances for multi-belt drives, allowing for direct replacement of traditional wrapped belts to increase horsepower capacity and reduce maintenance intervals on critical motor drives.
Key Benefits
- High-Efficiency Power Transfer: The raw-edge sidewall and cogged design provide up to 3% higher efficiency than standard wrapped belts, reducing energy costs in continuous-duty HVAC systems.
- Extended Service Life: Advanced EPDM construction resists oil, chemicals, and environmental degradation while maintaining flexibility under high-speed operation.
- Reduced Maintenance: High-strength synthetic fiber cords minimize stretching, ensuring consistent tension and reducing the need for frequent drive adjustments.
- Optimized Cooling: Deep-molded notches increase airflow and surface area, allowing the belt to run cooler and preventing premature failure caused by thermal stress.
Common Questions
Can I use a Browning AX28 to replace a standard A28 wrapped belt?
Yes. AX28 Gripnotch belts are fully compatible with standard A-section pulleys. The notched design is often preferred for smaller sheave diameters because it handles tighter bends with less internal friction and heat buildup than a smooth-backed belt.
What is the difference between pitch length and outside diameter for an AX28?
For the Browning AX28, the outside diameter is approximately 30.2 inches, while the pitch length (the effective length for performance calculations) is 29.3 inches. Always confirm the belt section width (1/2") and thickness (5/16") to ensure a proper seat in the pulley groove.
Is the AX28 belt static conducting?
Yes, these belts are manufactured to static conducting standards, making them suitable for use in environments where the prevention of static buildup is necessary for safety or equipment protection.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Browning AX28 Belt is a heavy-duty, cogged V-belt engineered for high-torque HVACR and industrial applications where drive space is limited. Constructed with advanced EPDM rubber, this Type AX Gripnotch belt offers superior heat resistance and ozone protection, maintaining performance in extreme environments ranging from -60°F to +250°F. The 30.2" outside diameter and 29.3" pitch length provide a precise fit for standard A-section sheaves, featuring precision-molded cogs that reduce bending stress and improve flexibility over smaller pulley diameters. This raw-edge design maximizes 98% energy efficiency by increasing surface area for better heat dissipation and improved gripnotch contact, minimizing slippage and vibration. As a Code 1 match belt, it ensures tight tolerances for multi-belt drives, allowing for direct replacement of traditional wrapped belts to increase horsepower capacity and reduce maintenance intervals on critical motor drives.
Key Benefits
- High-Efficiency Power Transfer: The raw-edge sidewall and cogged design provide up to 3% higher efficiency than standard wrapped belts, reducing energy costs in continuous-duty HVAC systems.
- Extended Service Life: Advanced EPDM construction resists oil, chemicals, and environmental degradation while maintaining flexibility under high-speed operation.
- Reduced Maintenance: High-strength synthetic fiber cords minimize stretching, ensuring consistent tension and reducing the need for frequent drive adjustments.
- Optimized Cooling: Deep-molded notches increase airflow and surface area, allowing the belt to run cooler and preventing premature failure caused by thermal stress.
Common Questions
Can I use a Browning AX28 to replace a standard A28 wrapped belt?
Yes. AX28 Gripnotch belts are fully compatible with standard A-section pulleys. The notched design is often preferred for smaller sheave diameters because it handles tighter bends with less internal friction and heat buildup than a smooth-backed belt.
What is the difference between pitch length and outside diameter for an AX28?
For the Browning AX28, the outside diameter is approximately 30.2 inches, while the pitch length (the effective length for performance calculations) is 29.3 inches. Always confirm the belt section width (1/2") and thickness (5/16") to ensure a proper seat in the pulley groove.
Is the AX28 belt static conducting?
Yes, these belts are manufactured to static conducting standards, making them suitable for use in environments where the prevention of static buildup is necessary for safety or equipment protection.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
