Browning 2BK65H Sheave
The Browning 2BK65H Sheave is a heavy-duty cast iron pulley engineered for dual-groove power transmission in demanding HVACR and industrial blower applications. With a 6.25 inch outside diameter, this BK style sheave is designed for precision balance and high-torque reliability. It is compatible with H series bushings, allowing for versatile shaft mounting across various motor configurations. The Browning 2BK65H accommodates 4L, 5L, A, and B belts, providing a flexible solution for technicians managing mixed-belt inventories. Its rugged construction ensures stable pitch diameters and minimizes vibration in high-static pressure systems. Using a two groove sheave setup like the 2BK65H allows for higher load capacity and drive redundancy compared to single-groove alternatives. Whether you are replacing a worn fixed bore sheave or upgrading a belt drive for better airflow control, this component provides the structural integrity required for continuous duty cycles in commercial air handlers and condensing units.
Key Benefits- Dual-groove design increases power transfer capacity and provides system redundancy for critical HVACR ventilation.
- Compatible with H-type tapered bushings, ensuring a secure, concentric fit on various shaft sizes to prevent keyway damage.
- High-grade cast iron construction offers superior heat dissipation and wear resistance compared to stamped steel alternatives.
- Versatile combination groove geometry supports 4L, 5L, A, and B section V-belts for streamlined inventory management.
- Precision-machined tolerances reduce belt slippage and extend the service life of motor bearings and drive components.
What is the datum diameter for the Browning 2BK65H?
The datum diameter varies by belt type; for A belts, it is approximately 5.8 inches, while for B belts, it is approximately 6.2 inches. Always verify your drive ratio calculations based on the specific belt profile used.
Does this sheave come with the H bushing?
No, this is the Browning 2BK65H sheave only. The H series bushing must be purchased separately to match your specific motor or fan shaft diameter.
Can I use this sheave with a singular belt?
Yes, you can run a single belt in one groove for testing or low-torque applications, but for standard operation, dual belts are recommended to utilize the full power rating of the cast iron sheave.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $149.64
-65%$149.64
$52.37Browning 2BK65H Sheave
The Browning 2BK65H Sheave is a heavy-duty cast iron pulley engineered for dual-groove power transmission in demanding HVACR and industrial blower applications. With a 6.25 inch outside diameter, this BK style sheave is designed for precision balance and high-torque reliability. It is compatible with H series bushings, allowing for versatile shaft mounting across various motor configurations. The Browning 2BK65H accommodates 4L, 5L, A, and B belts, providing a flexible solution for technicians managing mixed-belt inventories. Its rugged construction ensures stable pitch diameters and minimizes vibration in high-static pressure systems. Using a two groove sheave setup like the 2BK65H allows for higher load capacity and drive redundancy compared to single-groove alternatives. Whether you are replacing a worn fixed bore sheave or upgrading a belt drive for better airflow control, this component provides the structural integrity required for continuous duty cycles in commercial air handlers and condensing units.
Key Benefits- Dual-groove design increases power transfer capacity and provides system redundancy for critical HVACR ventilation.
- Compatible with H-type tapered bushings, ensuring a secure, concentric fit on various shaft sizes to prevent keyway damage.
- High-grade cast iron construction offers superior heat dissipation and wear resistance compared to stamped steel alternatives.
- Versatile combination groove geometry supports 4L, 5L, A, and B section V-belts for streamlined inventory management.
- Precision-machined tolerances reduce belt slippage and extend the service life of motor bearings and drive components.
What is the datum diameter for the Browning 2BK65H?
The datum diameter varies by belt type; for A belts, it is approximately 5.8 inches, while for B belts, it is approximately 6.2 inches. Always verify your drive ratio calculations based on the specific belt profile used.
Does this sheave come with the H bushing?
No, this is the Browning 2BK65H sheave only. The H series bushing must be purchased separately to match your specific motor or fan shaft diameter.
Can I use this sheave with a singular belt?
Yes, you can run a single belt in one groove for testing or low-torque applications, but for standard operation, dual belts are recommended to utilize the full power rating of the cast iron sheave.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Browning 2BK65H Sheave is a heavy-duty cast iron pulley engineered for dual-groove power transmission in demanding HVACR and industrial blower applications. With a 6.25 inch outside diameter, this BK style sheave is designed for precision balance and high-torque reliability. It is compatible with H series bushings, allowing for versatile shaft mounting across various motor configurations. The Browning 2BK65H accommodates 4L, 5L, A, and B belts, providing a flexible solution for technicians managing mixed-belt inventories. Its rugged construction ensures stable pitch diameters and minimizes vibration in high-static pressure systems. Using a two groove sheave setup like the 2BK65H allows for higher load capacity and drive redundancy compared to single-groove alternatives. Whether you are replacing a worn fixed bore sheave or upgrading a belt drive for better airflow control, this component provides the structural integrity required for continuous duty cycles in commercial air handlers and condensing units.
Key Benefits- Dual-groove design increases power transfer capacity and provides system redundancy for critical HVACR ventilation.
- Compatible with H-type tapered bushings, ensuring a secure, concentric fit on various shaft sizes to prevent keyway damage.
- High-grade cast iron construction offers superior heat dissipation and wear resistance compared to stamped steel alternatives.
- Versatile combination groove geometry supports 4L, 5L, A, and B section V-belts for streamlined inventory management.
- Precision-machined tolerances reduce belt slippage and extend the service life of motor bearings and drive components.
What is the datum diameter for the Browning 2BK65H?
The datum diameter varies by belt type; for A belts, it is approximately 5.8 inches, while for B belts, it is approximately 6.2 inches. Always verify your drive ratio calculations based on the specific belt profile used.
Does this sheave come with the H bushing?
No, this is the Browning 2BK65H sheave only. The H series bushing must be purchased separately to match your specific motor or fan shaft diameter.
Can I use this sheave with a singular belt?
Yes, you can run a single belt in one groove for testing or low-torque applications, but for standard operation, dual belts are recommended to utilize the full power rating of the cast iron sheave.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
