Belimo ECON-ZIP-10K Sensor
The Belimo ECON-ZIP-10K Sensor is a precision-engineered NTC 10k Ohm temperature sensor designed specifically for seamless integration with the Belimo ZIP Economizer system. As a veteran-grade dry bulb sensor, this unit provides the essential thermal feedback required for single dry bulb changeover or differential dry bulb changeover strategies. Encased in a plenum-rated, FEP-jacketed cable with an IP66-rated housing, this thermistor ensures stable, long-term performance in demanding rooftop unit (RTU) environments. Whether utilized as an outdoor air sensor (OAT), return air sensor (RAT), or supply air sensor (SAT), it offers a high degree of accuracy (± 0.36°F) and minimal stability drift. The universal T-bracket mounting allows for flexible installation through ductwork or fan housings, while the pre-terminated 1/4-inch female spade connectors facilitate a rapid, plug-and-play setup for rapid field commission.
Key Benefits- Automatic Configuration: Engineered for "plug and play" detection by the ZIP Base unit, eliminating the need for manual sensor calibration or complex addressing.
- Versatile Application: Functions interchangeably as an OAT, RAT, or SAT sensor, allowing contractors to standardize truck stock for various economizer cooling requirements.
- Durable Construction: Features plenum-rated etched Teflon cable and galvanized mounting hardware to withstand temperature extremes from -67°F to +176°F.
- Regulatory Compliance: Facilitates adherence to California Title 24 and ASHRAE 90.1 energy codes by enabling accurate free-cooling changeover logic.
Can I use a standard 10k thermistor instead of the ECON-ZIP-10K?
While the ZIP Economizer utilizes 10k Type II logic, using the Belimo ECON-ZIP-10K ensures proper connector compatibility and resistance curve matching recognized by the controller’s proprietary Fault Detection and Diagnostics (FDD).
How many of these sensors are required for a standard installation?
A minimum of one supply air sensor and one outdoor air sensor is required for basic functionality. For differential temperature changeover, a third sensor must be mounted in the return air stream.
Where is the best mounting location for accurate readings?
Sensors should be placed directly in the air stream. If used for outdoor air, ensure the sensor is shielded from direct sunlight and moisture to prevent thermal bias or sensor degradation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $31.87
-65%$31.87
$11.15Belimo ECON-ZIP-10K Sensor
The Belimo ECON-ZIP-10K Sensor is a precision-engineered NTC 10k Ohm temperature sensor designed specifically for seamless integration with the Belimo ZIP Economizer system. As a veteran-grade dry bulb sensor, this unit provides the essential thermal feedback required for single dry bulb changeover or differential dry bulb changeover strategies. Encased in a plenum-rated, FEP-jacketed cable with an IP66-rated housing, this thermistor ensures stable, long-term performance in demanding rooftop unit (RTU) environments. Whether utilized as an outdoor air sensor (OAT), return air sensor (RAT), or supply air sensor (SAT), it offers a high degree of accuracy (± 0.36°F) and minimal stability drift. The universal T-bracket mounting allows for flexible installation through ductwork or fan housings, while the pre-terminated 1/4-inch female spade connectors facilitate a rapid, plug-and-play setup for rapid field commission.
Key Benefits- Automatic Configuration: Engineered for "plug and play" detection by the ZIP Base unit, eliminating the need for manual sensor calibration or complex addressing.
- Versatile Application: Functions interchangeably as an OAT, RAT, or SAT sensor, allowing contractors to standardize truck stock for various economizer cooling requirements.
- Durable Construction: Features plenum-rated etched Teflon cable and galvanized mounting hardware to withstand temperature extremes from -67°F to +176°F.
- Regulatory Compliance: Facilitates adherence to California Title 24 and ASHRAE 90.1 energy codes by enabling accurate free-cooling changeover logic.
Can I use a standard 10k thermistor instead of the ECON-ZIP-10K?
While the ZIP Economizer utilizes 10k Type II logic, using the Belimo ECON-ZIP-10K ensures proper connector compatibility and resistance curve matching recognized by the controller’s proprietary Fault Detection and Diagnostics (FDD).
How many of these sensors are required for a standard installation?
A minimum of one supply air sensor and one outdoor air sensor is required for basic functionality. For differential temperature changeover, a third sensor must be mounted in the return air stream.
Where is the best mounting location for accurate readings?
Sensors should be placed directly in the air stream. If used for outdoor air, ensure the sensor is shielded from direct sunlight and moisture to prevent thermal bias or sensor degradation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Belimo ECON-ZIP-10K Sensor is a precision-engineered NTC 10k Ohm temperature sensor designed specifically for seamless integration with the Belimo ZIP Economizer system. As a veteran-grade dry bulb sensor, this unit provides the essential thermal feedback required for single dry bulb changeover or differential dry bulb changeover strategies. Encased in a plenum-rated, FEP-jacketed cable with an IP66-rated housing, this thermistor ensures stable, long-term performance in demanding rooftop unit (RTU) environments. Whether utilized as an outdoor air sensor (OAT), return air sensor (RAT), or supply air sensor (SAT), it offers a high degree of accuracy (± 0.36°F) and minimal stability drift. The universal T-bracket mounting allows for flexible installation through ductwork or fan housings, while the pre-terminated 1/4-inch female spade connectors facilitate a rapid, plug-and-play setup for rapid field commission.
Key Benefits- Automatic Configuration: Engineered for "plug and play" detection by the ZIP Base unit, eliminating the need for manual sensor calibration or complex addressing.
- Versatile Application: Functions interchangeably as an OAT, RAT, or SAT sensor, allowing contractors to standardize truck stock for various economizer cooling requirements.
- Durable Construction: Features plenum-rated etched Teflon cable and galvanized mounting hardware to withstand temperature extremes from -67°F to +176°F.
- Regulatory Compliance: Facilitates adherence to California Title 24 and ASHRAE 90.1 energy codes by enabling accurate free-cooling changeover logic.
Can I use a standard 10k thermistor instead of the ECON-ZIP-10K?
While the ZIP Economizer utilizes 10k Type II logic, using the Belimo ECON-ZIP-10K ensures proper connector compatibility and resistance curve matching recognized by the controller’s proprietary Fault Detection and Diagnostics (FDD).
How many of these sensors are required for a standard installation?
A minimum of one supply air sensor and one outdoor air sensor is required for basic functionality. For differential temperature changeover, a third sensor must be mounted in the return air stream.
Where is the best mounting location for accurate readings?
Sensors should be placed directly in the air stream. If used for outdoor air, ensure the sensor is shielded from direct sunlight and moisture to prevent thermal bias or sensor degradation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
