Belimo 01CT-5LH Cable
The Belimo 01CT-5LH is a precision NTC10k Pre sensor designed for accurate temperature monitoring in high-performance HVAC systems. This passive temperature cable sensor features a 2-meter, 2-wire configuration, providing seamless integration with various controllers and building automation systems. Built for durability, the 01CT-5LH utilizes a high-quality NTC thermistor encapsulated in a stainless steel probe, ensuring rapid thermal response and long-term stability in demanding air and water applications. Contractors rely on this plenum-rated cable sensor for its consistent resistance-to-temperature curve, which is critical for maintaining precise setpoint control in AHUs and chillers. The IP67 protection class and robust insulation make it suitable for environments where moisture or dust ingress might compromise standard sensors. When installing the Belimo 01CT-5LH cable temp sensor, ensure proper wiring to the analog input of your controller to leverage its tight tolerances for optimized system efficiency and energy management.
Key Benefits- High-Accuracy NTC10k Pre Element: Delivers precise resistance readings for tighter control of heating and cooling sequences.
- Robust IP67 Protection: Engineered to withstand harsh mechanical environments, ensuring reliability in high-humidity applications.
- Versatile 2-Meter Lead: Provides sufficient length for flexible sensor placement within ductwork or piping insulation.
- Stainless Steel Housing: Resists corrosion and mechanical stress, maintaining physical integrity over the equipment lifecycle.
- Plug-and-Play Compatibility: Designed for effortless integration with standard building automation controllers and HVAC systems.
Is the Belimo 01CT-5LH compatible with 10k Type II or Type III controllers?
The 01CT-5LH utilizes a specific NTC10k Pre element. Always verify the resistance curve requirements of your controller to ensure it matches the 10k Pre standard rather than standard Type II or III curves.
Can this sensor be used for immersion applications?
While the probe is stainless steel and IP67 rated, it is specifically designed as a cable temperature sensor. For direct immersion in pressurized water lines, it should be used in conjunction with a compatible thermowell to prevent cable damage.
What is the maximum operating temperature for the cable insulation?
The 01CT-5LH is rated for standard HVAC operating ranges, typically up to 105°C (221°F). Exceeding this limit can degrade the cable jacket and lead to short circuits or signal drift.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $20.25
-65%$20.25
$7.09Belimo 01CT-5LH Cable
The Belimo 01CT-5LH is a precision NTC10k Pre sensor designed for accurate temperature monitoring in high-performance HVAC systems. This passive temperature cable sensor features a 2-meter, 2-wire configuration, providing seamless integration with various controllers and building automation systems. Built for durability, the 01CT-5LH utilizes a high-quality NTC thermistor encapsulated in a stainless steel probe, ensuring rapid thermal response and long-term stability in demanding air and water applications. Contractors rely on this plenum-rated cable sensor for its consistent resistance-to-temperature curve, which is critical for maintaining precise setpoint control in AHUs and chillers. The IP67 protection class and robust insulation make it suitable for environments where moisture or dust ingress might compromise standard sensors. When installing the Belimo 01CT-5LH cable temp sensor, ensure proper wiring to the analog input of your controller to leverage its tight tolerances for optimized system efficiency and energy management.
Key Benefits- High-Accuracy NTC10k Pre Element: Delivers precise resistance readings for tighter control of heating and cooling sequences.
- Robust IP67 Protection: Engineered to withstand harsh mechanical environments, ensuring reliability in high-humidity applications.
- Versatile 2-Meter Lead: Provides sufficient length for flexible sensor placement within ductwork or piping insulation.
- Stainless Steel Housing: Resists corrosion and mechanical stress, maintaining physical integrity over the equipment lifecycle.
- Plug-and-Play Compatibility: Designed for effortless integration with standard building automation controllers and HVAC systems.
Is the Belimo 01CT-5LH compatible with 10k Type II or Type III controllers?
The 01CT-5LH utilizes a specific NTC10k Pre element. Always verify the resistance curve requirements of your controller to ensure it matches the 10k Pre standard rather than standard Type II or III curves.
Can this sensor be used for immersion applications?
While the probe is stainless steel and IP67 rated, it is specifically designed as a cable temperature sensor. For direct immersion in pressurized water lines, it should be used in conjunction with a compatible thermowell to prevent cable damage.
What is the maximum operating temperature for the cable insulation?
The 01CT-5LH is rated for standard HVAC operating ranges, typically up to 105°C (221°F). Exceeding this limit can degrade the cable jacket and lead to short circuits or signal drift.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Belimo 01CT-5LH is a precision NTC10k Pre sensor designed for accurate temperature monitoring in high-performance HVAC systems. This passive temperature cable sensor features a 2-meter, 2-wire configuration, providing seamless integration with various controllers and building automation systems. Built for durability, the 01CT-5LH utilizes a high-quality NTC thermistor encapsulated in a stainless steel probe, ensuring rapid thermal response and long-term stability in demanding air and water applications. Contractors rely on this plenum-rated cable sensor for its consistent resistance-to-temperature curve, which is critical for maintaining precise setpoint control in AHUs and chillers. The IP67 protection class and robust insulation make it suitable for environments where moisture or dust ingress might compromise standard sensors. When installing the Belimo 01CT-5LH cable temp sensor, ensure proper wiring to the analog input of your controller to leverage its tight tolerances for optimized system efficiency and energy management.
Key Benefits- High-Accuracy NTC10k Pre Element: Delivers precise resistance readings for tighter control of heating and cooling sequences.
- Robust IP67 Protection: Engineered to withstand harsh mechanical environments, ensuring reliability in high-humidity applications.
- Versatile 2-Meter Lead: Provides sufficient length for flexible sensor placement within ductwork or piping insulation.
- Stainless Steel Housing: Resists corrosion and mechanical stress, maintaining physical integrity over the equipment lifecycle.
- Plug-and-Play Compatibility: Designed for effortless integration with standard building automation controllers and HVAC systems.
Is the Belimo 01CT-5LH compatible with 10k Type II or Type III controllers?
The 01CT-5LH utilizes a specific NTC10k Pre element. Always verify the resistance curve requirements of your controller to ensure it matches the 10k Pre standard rather than standard Type II or III curves.
Can this sensor be used for immersion applications?
While the probe is stainless steel and IP67 rated, it is specifically designed as a cable temperature sensor. For direct immersion in pressurized water lines, it should be used in conjunction with a compatible thermowell to prevent cable damage.
What is the maximum operating temperature for the cable insulation?
The 01CT-5LH is rated for standard HVAC operating ranges, typically up to 105°C (221°F). Exceeding this limit can degrade the cable jacket and lead to short circuits or signal drift.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
