Beckett Igniter 21887U Cord Set
Professional-grade Beckett 21887U Cordset Valve PD Timer is a critical component for technicians upgrading or servicing high-performance fuel units. This precision 4-second delay cordset is specifically engineered to provide a necessary valve-on delay (pre-purge) for 120 VAC solenoid valves, including the Beckett CleanCut, Delta F84, and Suntec models. By ensuring the motor reaches full RPM and the air pattern is established before fuel delivery, this Beckett oil burner part mitigates soot buildup and protects the heat exchanger from premature fouling. It serves as a direct integration for primary controls that lack a built-in pre-purge function, making it indispensable when replacing a non-solenoid pump with a CleanCut fuel unit. The robust electronic timing circuit is encapsulated for durability against the vibration and thermal cycles typical of industrial and residential burner housings.
- Universal Compatibility: Seamlessly plugs into standard 120V solenoid coils for Beckett and Suntec pumps.
- Pre-Purge Optimization: Delivers a consistent 4-second delay to ensure stable ignition and cleaner combustion cycles.
- Direct Replacement: Simplifies the transition from standard Beckett igniter cord sets to precision-timed systems.
- Field Efficiency: Reduces call-backs by preventing "rumble" starts and ensuring a sharp fuel cutoff and start.
Common Questions
Can I use the 21887U with a 240V system?
No, this unit is strictly rated for 120 VAC solenoid valves and primary control circuits. Attempting to use it with 240V hardware will damage the internal timing electronics.
When is a PD timer required over a standard cordset?
Technicians should use the 21887U when the primary control (such as older R7184 series without delay) does not provide a pre-purge timing sequence, but a CleanCut or similar solenoid pump is installed.
Does this cordset replace the Beckett 21807U?
The 21887U is the timed version of the 21807U. While they share the same physical plug configuration, the 21887U adds the 4-second delay logic required for cleaner startups.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $22.39
-65%$22.39
$7.84Beckett Igniter 21887U Cord Set
Professional-grade Beckett 21887U Cordset Valve PD Timer is a critical component for technicians upgrading or servicing high-performance fuel units. This precision 4-second delay cordset is specifically engineered to provide a necessary valve-on delay (pre-purge) for 120 VAC solenoid valves, including the Beckett CleanCut, Delta F84, and Suntec models. By ensuring the motor reaches full RPM and the air pattern is established before fuel delivery, this Beckett oil burner part mitigates soot buildup and protects the heat exchanger from premature fouling. It serves as a direct integration for primary controls that lack a built-in pre-purge function, making it indispensable when replacing a non-solenoid pump with a CleanCut fuel unit. The robust electronic timing circuit is encapsulated for durability against the vibration and thermal cycles typical of industrial and residential burner housings.
- Universal Compatibility: Seamlessly plugs into standard 120V solenoid coils for Beckett and Suntec pumps.
- Pre-Purge Optimization: Delivers a consistent 4-second delay to ensure stable ignition and cleaner combustion cycles.
- Direct Replacement: Simplifies the transition from standard Beckett igniter cord sets to precision-timed systems.
- Field Efficiency: Reduces call-backs by preventing "rumble" starts and ensuring a sharp fuel cutoff and start.
Common Questions
Can I use the 21887U with a 240V system?
No, this unit is strictly rated for 120 VAC solenoid valves and primary control circuits. Attempting to use it with 240V hardware will damage the internal timing electronics.
When is a PD timer required over a standard cordset?
Technicians should use the 21887U when the primary control (such as older R7184 series without delay) does not provide a pre-purge timing sequence, but a CleanCut or similar solenoid pump is installed.
Does this cordset replace the Beckett 21807U?
The 21887U is the timed version of the 21807U. While they share the same physical plug configuration, the 21887U adds the 4-second delay logic required for cleaner startups.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Professional-grade Beckett 21887U Cordset Valve PD Timer is a critical component for technicians upgrading or servicing high-performance fuel units. This precision 4-second delay cordset is specifically engineered to provide a necessary valve-on delay (pre-purge) for 120 VAC solenoid valves, including the Beckett CleanCut, Delta F84, and Suntec models. By ensuring the motor reaches full RPM and the air pattern is established before fuel delivery, this Beckett oil burner part mitigates soot buildup and protects the heat exchanger from premature fouling. It serves as a direct integration for primary controls that lack a built-in pre-purge function, making it indispensable when replacing a non-solenoid pump with a CleanCut fuel unit. The robust electronic timing circuit is encapsulated for durability against the vibration and thermal cycles typical of industrial and residential burner housings.
- Universal Compatibility: Seamlessly plugs into standard 120V solenoid coils for Beckett and Suntec pumps.
- Pre-Purge Optimization: Delivers a consistent 4-second delay to ensure stable ignition and cleaner combustion cycles.
- Direct Replacement: Simplifies the transition from standard Beckett igniter cord sets to precision-timed systems.
- Field Efficiency: Reduces call-backs by preventing "rumble" starts and ensuring a sharp fuel cutoff and start.
Common Questions
Can I use the 21887U with a 240V system?
No, this unit is strictly rated for 120 VAC solenoid valves and primary control circuits. Attempting to use it with 240V hardware will damage the internal timing electronics.
When is a PD timer required over a standard cordset?
Technicians should use the 21887U when the primary control (such as older R7184 series without delay) does not provide a pre-purge timing sequence, but a CleanCut or similar solenoid pump is installed.
Does this cordset replace the Beckett 21807U?
The 21887U is the timed version of the 21807U. While they share the same physical plug configuration, the 21887U adds the 4-second delay logic required for cleaner startups.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
