BASO Y75AS-1 Flame Sensor
The BASO Y75AS-1 Flame Sensor is a critical safety component designed for precise flame rectification in industrial and commercial gas-fired equipment. This sensing probe works by utilizing the ionization principle to confirm the presence of a stable burner flame, signaling the control board to maintain the gas valve in the open position. Engineered as a high-durability replacement for various electronic ignition control systems, the Y75AS-1 is identical to the Y75AS-1H model and serves as a direct upgrade for older Y75AA series probes. This specific SKU is packaged as a QTY 2 Flame Sensor set, ensuring technicians have a backup or a pair for dual-burner configurations.
Built for the rigors of high-temperature environments, the sensor features a 0.114-inch diameter rod constructed from Kanthal D or Hoskin 815, capable of withstanding operating temperatures up to 1,800°F (982°C). The probe is insulated with a robust Steatite ceramic base and includes a 90-degree terminal connector (male spade) for secure wiring in tight clearances. This unit is fully compatible with Direct Spark Ignition (DSI), Hot Surface Ignition (HSI), and Intermittent Pilot Ignition (IPI) systems, specifically optimized for G60, G65, and G66 ignition modules. The 7/16-27 threaded nut allows for quick, reliable mounting into the burner assembly without specialized brackets.
Key Benefits for the Contractor:
- Dual-Pack Value: Includes two sensors per bag to reduce secondary service calls and stock replacement flame sensors for the most common furnace failures.
- Universal Ignition Compatibility: Seamlessly integrates with intermittent pilot ignition and HSI systems across industrial heating applications.
- High-Temperature Durability: Steatite ceramic and Kanthal D rod construction prevent premature failure under extreme thermal loads.
- Simplified Mounting: The 90-degree male spade and 7/16-27 thread ensure compatibility with standard HVAC flame sensor replacement mounts.
Common Questions:
How do I diagnose if the BASO Y75AS-1 is faulty?
Technicians should check for "short cycling," where the burner ignites but shuts off within seconds. Use a multimeter to measure DC microamps; a reading below the ignition module's threshold (typically 1.0 µA) indicates a dirty or damaged sensor.
Is there a difference between the Y75AS-1 and the Y75AS-1H?
No. The BASO Y75AS-1H and Y75AS-1 are functionally and physically identical; "H" often denotes a specific packaging or distributor code in the Y75 Series Sensing Probes catalog.
Can this sensor be cleaned instead of replaced?
While minor soot can be removed with a fine abrasive, deep carbonization or cracks in the Steatite ceramic require a full replacement to ensure the safety integrity of the flame monitoring circuit.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $49.04
-65%$49.04
$17.16BASO Y75AS-1 Flame Sensor
The BASO Y75AS-1 Flame Sensor is a critical safety component designed for precise flame rectification in industrial and commercial gas-fired equipment. This sensing probe works by utilizing the ionization principle to confirm the presence of a stable burner flame, signaling the control board to maintain the gas valve in the open position. Engineered as a high-durability replacement for various electronic ignition control systems, the Y75AS-1 is identical to the Y75AS-1H model and serves as a direct upgrade for older Y75AA series probes. This specific SKU is packaged as a QTY 2 Flame Sensor set, ensuring technicians have a backup or a pair for dual-burner configurations.
Built for the rigors of high-temperature environments, the sensor features a 0.114-inch diameter rod constructed from Kanthal D or Hoskin 815, capable of withstanding operating temperatures up to 1,800°F (982°C). The probe is insulated with a robust Steatite ceramic base and includes a 90-degree terminal connector (male spade) for secure wiring in tight clearances. This unit is fully compatible with Direct Spark Ignition (DSI), Hot Surface Ignition (HSI), and Intermittent Pilot Ignition (IPI) systems, specifically optimized for G60, G65, and G66 ignition modules. The 7/16-27 threaded nut allows for quick, reliable mounting into the burner assembly without specialized brackets.
Key Benefits for the Contractor:
- Dual-Pack Value: Includes two sensors per bag to reduce secondary service calls and stock replacement flame sensors for the most common furnace failures.
- Universal Ignition Compatibility: Seamlessly integrates with intermittent pilot ignition and HSI systems across industrial heating applications.
- High-Temperature Durability: Steatite ceramic and Kanthal D rod construction prevent premature failure under extreme thermal loads.
- Simplified Mounting: The 90-degree male spade and 7/16-27 thread ensure compatibility with standard HVAC flame sensor replacement mounts.
Common Questions:
How do I diagnose if the BASO Y75AS-1 is faulty?
Technicians should check for "short cycling," where the burner ignites but shuts off within seconds. Use a multimeter to measure DC microamps; a reading below the ignition module's threshold (typically 1.0 µA) indicates a dirty or damaged sensor.
Is there a difference between the Y75AS-1 and the Y75AS-1H?
No. The BASO Y75AS-1H and Y75AS-1 are functionally and physically identical; "H" often denotes a specific packaging or distributor code in the Y75 Series Sensing Probes catalog.
Can this sensor be cleaned instead of replaced?
While minor soot can be removed with a fine abrasive, deep carbonization or cracks in the Steatite ceramic require a full replacement to ensure the safety integrity of the flame monitoring circuit.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The BASO Y75AS-1 Flame Sensor is a critical safety component designed for precise flame rectification in industrial and commercial gas-fired equipment. This sensing probe works by utilizing the ionization principle to confirm the presence of a stable burner flame, signaling the control board to maintain the gas valve in the open position. Engineered as a high-durability replacement for various electronic ignition control systems, the Y75AS-1 is identical to the Y75AS-1H model and serves as a direct upgrade for older Y75AA series probes. This specific SKU is packaged as a QTY 2 Flame Sensor set, ensuring technicians have a backup or a pair for dual-burner configurations.
Built for the rigors of high-temperature environments, the sensor features a 0.114-inch diameter rod constructed from Kanthal D or Hoskin 815, capable of withstanding operating temperatures up to 1,800°F (982°C). The probe is insulated with a robust Steatite ceramic base and includes a 90-degree terminal connector (male spade) for secure wiring in tight clearances. This unit is fully compatible with Direct Spark Ignition (DSI), Hot Surface Ignition (HSI), and Intermittent Pilot Ignition (IPI) systems, specifically optimized for G60, G65, and G66 ignition modules. The 7/16-27 threaded nut allows for quick, reliable mounting into the burner assembly without specialized brackets.
Key Benefits for the Contractor:
- Dual-Pack Value: Includes two sensors per bag to reduce secondary service calls and stock replacement flame sensors for the most common furnace failures.
- Universal Ignition Compatibility: Seamlessly integrates with intermittent pilot ignition and HSI systems across industrial heating applications.
- High-Temperature Durability: Steatite ceramic and Kanthal D rod construction prevent premature failure under extreme thermal loads.
- Simplified Mounting: The 90-degree male spade and 7/16-27 thread ensure compatibility with standard HVAC flame sensor replacement mounts.
Common Questions:
How do I diagnose if the BASO Y75AS-1 is faulty?
Technicians should check for "short cycling," where the burner ignites but shuts off within seconds. Use a multimeter to measure DC microamps; a reading below the ignition module's threshold (typically 1.0 µA) indicates a dirty or damaged sensor.
Is there a difference between the Y75AS-1 and the Y75AS-1H?
No. The BASO Y75AS-1H and Y75AS-1 are functionally and physically identical; "H" often denotes a specific packaging or distributor code in the Y75 Series Sensing Probes catalog.
Can this sensor be cleaned instead of replaced?
While minor soot can be removed with a fine abrasive, deep carbonization or cracks in the Steatite ceramic require a full replacement to ensure the safety integrity of the flame monitoring circuit.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
