Amana-Goodman 0130F00433 Switch
The Amana-Goodman 0130F00433 Dual Pressure Switch is a critical safety component designed for high-efficiency, 2-stage gas furnaces, including models in the Amana AMEC96 and Goodman GMVC series. This genuine OEM Goodman furnace part is precisely calibrated for dual-stage operation, featuring set points of -0.72" WC and -0.97" WC. Also identified as a furnace draft inducer switch, this part ensures that the combustion blower is operating at the required RPM to safely vent flue gases before ignition. If your system encounters a pressure switch stuck open error code or experiences short cycling, replacing a failing 0130F00433 2-stage air switch can restore reliable heating performance. Constructed for durability in demanding HVAC environments, this dual pressure switch replacement maintains the strict airflow tolerances necessary for high-efficiency 96% AFUE systems, protecting your heat exchanger from improper venting conditions.
Key Benefits
- System Safety: Ensures the inducer motor creates a proper vacuum, preventing hazardous flue gas buildup.
- Dual-Stage Calibration: Specifically engineered for -0.72/-0.97" WC set points to support low and high-fire furnace stages.
- Exact OEM Fit: Direct replacement for part number 0130F00433, ensuring seamless compatibility with Amana, Goodman, and Daikin equipment.
- Reliable Performance: Resolves common furnace lockout issues caused by a ruptured diaphragm or faulty electrical contacts.
Common Questions
What does a furnace pressure switch do?
It serves as a safety sensor that detects the vacuum created by the inducer motor. It must close its electrical circuit to allow the ignition process to proceed, ensuring the exhaust path is clear.
What are the symptoms of a bad 0130F00433 switch?
Common signs include the furnace inducer running without the igniter glowing, a 3-flash diagnostic code on the control board, or the system locking out after several failed start attempts.
Can I test this switch with a multimeter?
Yes, technicians use a multimeter to check for continuity across the terminals when the vacuum is applied. If the switch remains open while the inducer is at full speed, it likely requires replacement.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $46.63
-65%$46.63
$16.32Amana-Goodman 0130F00433 Switch
The Amana-Goodman 0130F00433 Dual Pressure Switch is a critical safety component designed for high-efficiency, 2-stage gas furnaces, including models in the Amana AMEC96 and Goodman GMVC series. This genuine OEM Goodman furnace part is precisely calibrated for dual-stage operation, featuring set points of -0.72" WC and -0.97" WC. Also identified as a furnace draft inducer switch, this part ensures that the combustion blower is operating at the required RPM to safely vent flue gases before ignition. If your system encounters a pressure switch stuck open error code or experiences short cycling, replacing a failing 0130F00433 2-stage air switch can restore reliable heating performance. Constructed for durability in demanding HVAC environments, this dual pressure switch replacement maintains the strict airflow tolerances necessary for high-efficiency 96% AFUE systems, protecting your heat exchanger from improper venting conditions.
Key Benefits
- System Safety: Ensures the inducer motor creates a proper vacuum, preventing hazardous flue gas buildup.
- Dual-Stage Calibration: Specifically engineered for -0.72/-0.97" WC set points to support low and high-fire furnace stages.
- Exact OEM Fit: Direct replacement for part number 0130F00433, ensuring seamless compatibility with Amana, Goodman, and Daikin equipment.
- Reliable Performance: Resolves common furnace lockout issues caused by a ruptured diaphragm or faulty electrical contacts.
Common Questions
What does a furnace pressure switch do?
It serves as a safety sensor that detects the vacuum created by the inducer motor. It must close its electrical circuit to allow the ignition process to proceed, ensuring the exhaust path is clear.
What are the symptoms of a bad 0130F00433 switch?
Common signs include the furnace inducer running without the igniter glowing, a 3-flash diagnostic code on the control board, or the system locking out after several failed start attempts.
Can I test this switch with a multimeter?
Yes, technicians use a multimeter to check for continuity across the terminals when the vacuum is applied. If the switch remains open while the inducer is at full speed, it likely requires replacement.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Amana-Goodman 0130F00433 Dual Pressure Switch is a critical safety component designed for high-efficiency, 2-stage gas furnaces, including models in the Amana AMEC96 and Goodman GMVC series. This genuine OEM Goodman furnace part is precisely calibrated for dual-stage operation, featuring set points of -0.72" WC and -0.97" WC. Also identified as a furnace draft inducer switch, this part ensures that the combustion blower is operating at the required RPM to safely vent flue gases before ignition. If your system encounters a pressure switch stuck open error code or experiences short cycling, replacing a failing 0130F00433 2-stage air switch can restore reliable heating performance. Constructed for durability in demanding HVAC environments, this dual pressure switch replacement maintains the strict airflow tolerances necessary for high-efficiency 96% AFUE systems, protecting your heat exchanger from improper venting conditions.
Key Benefits
- System Safety: Ensures the inducer motor creates a proper vacuum, preventing hazardous flue gas buildup.
- Dual-Stage Calibration: Specifically engineered for -0.72/-0.97" WC set points to support low and high-fire furnace stages.
- Exact OEM Fit: Direct replacement for part number 0130F00433, ensuring seamless compatibility with Amana, Goodman, and Daikin equipment.
- Reliable Performance: Resolves common furnace lockout issues caused by a ruptured diaphragm or faulty electrical contacts.
Common Questions
What does a furnace pressure switch do?
It serves as a safety sensor that detects the vacuum created by the inducer motor. It must close its electrical circuit to allow the ignition process to proceed, ensuring the exhaust path is clear.
What are the symptoms of a bad 0130F00433 switch?
Common signs include the furnace inducer running without the igniter glowing, a 3-flash diagnostic code on the control board, or the system locking out after several failed start attempts.
Can I test this switch with a multimeter?
Yes, technicians use a multimeter to check for continuity across the terminals when the vacuum is applied. If the switch remains open while the inducer is at full speed, it likely requires replacement.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
